Sony MHC-F50 Operating Instructions Manual page 19

1
Press § EJECT and insert a
recorded tape in deck A or B.
With the side
you want to
play facing
forward
2
Press DIRECTION repeatedly to
select A to play one side. Select ß*
to play both sides.
To play both decks in succession, select
RELAY (relay play).**
3
Press TAPE A · or TAPE B ·.
Press ª (or TAPE A ( or TAPE B (
on the remote again) to play the reverse
side. The tape starts playing.
* The deck stops automatically after repeating the
sequence five times.
** Relay play always follows the following
sequence:
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
To Do this
Stop play Press π STOP (or p on the
remote).
Press PAUSE ∏ (or P on
Pause (Deck B only)
the remote). Press again to
resume play.
Fast-forward Press ‚ while playing
the front side or º while
playing the reverse side.
This fast-forwards the deck
shown on the display
(TAPE A or TAPE B).
Rewind Press º while playing
the front side or ‚ while
playing the reverse side.
This rewinds the deck
shown on the display
(TAPE A or TAPE B).
Remove the cassette Press § EJECT.
Adjust the volume Turn VOLUME (or press
VOL +/– on the remote).
Tips
• Pressing TAPE A ª/· or TAPE B ª/·
when the power is off automatically turns the
power on and starts tape playback if there is a tape
in the deck (One Touch Play).
• You can switch from another source to the tape
deck just by pressing TAPE A ª/· or TAPE B
ª/· (Automatic Source Selection).
• When you play a tape recorded with Dolby NR B,
pressDOLBY NR so that "DOLBY NR B" appears.
19