Sony MDS-JE530 Operating Instructions Manual page 12

Using the Display
While the deck is stopped
Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly to
change the display.
Each press of the button changes the display as follows:
Total number of tracks and total recorded
time (default display)
The contents of a programme (only when
"PROGRAM" lights up)
Level of the input signal
Pitch display
z
You can check the remaining recordable time on the MD
Press TIME. Each press of the button changes the display as
follows:
Total number of tracks and total recorded
time (default display)
Total number of tracks and remaining recordable
time on the MD (recordable MDs only)
Not shown for the premastered discs.
*
12
GB
Press
Press
Press
Press
Press
*
Press
While the deck is recording
Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly to
change the display.
Each press of the button changes the display as follows:
Track number and recorded time of the
current track (default display)
Level of the input signal
Sampling frequency indication
"FS -- kHz" appears while the analog signal is input.
z
You can check the remaining recordable time on the MD
Press TIME. Each press of the button changes the display as
follows:
Track number and recorded time of the
current track (default display)
Track number and remaining recordable
time on the MD
Press
Press
Press
Press
Press