General; Test Preparations; Rf Test Fixture (Conducted Test Method) - Sony Ericsson G900 Test Instructions

Electrical

Hide thumbs Also See for G900:

1 General

This document describes the process for functionally testing a mobile at the Electrical repair level.

Mobiles repaired at the Electrical repair level must have all Mechanical and Electrical level tests

performed and must pass without error to be considered a functional unit. If there are any failures,

repair the mobile according to the Mechanical and the Electrical Troubleshooting Guides.

2.1

1. Remove the stylus, battery cover, camera cover and frame according to the Working

Instructions, Mechanical.

2. Peal down the antenna carefully according to pic 1.

3. Insert a test SIM, install a fully charged standard battery to the phone and start the phone.

NOTE!

4. Attach the RF Probe to the mobile according to the pic 2.

Pic 1

1210-5419 Rev1

Company Internal

Sony Ericsson Mobile Communications AB

A Battery Eliminator (Dummy Battery) may be used in place of a standard fully

charged battery if you use a power supply that meets the requirements that are

documented in the Electrical Equipment List.

Test Instruction, Electrical

Pic 2

2(7)

Table of Contents