Transport Position; Using The Height Adjustment Memory - Invacare DOLOMITE Jazz Series User Manual

3.7 Transport Position

Lift the seat in the folding strap and press the push handles inwards to
fold the rollator. Close the locking mechanism (A) to lock the rollator
in folded position for transporting.
WARNING
Be careful when folding the rollator. Risk of pinching.
A

3.8 Using the Height Adjustment Memory

When adjusting the handle height for the first time, the built in
height adjustment memory can be used.
To access the height memory for the first time, raise the push
handles to the highest position to reveal the adjustment screw (A).
Loosen the screw of the height adjustment memory, but do not
remove it. Adjust the handles to a suitable height and retighten the
screw. Push the handles slightly downwards to fix the height. Suitable
tool to use is a 1,5 mm hexagon key (not included).
L
If the screw is removed by mistake and the adjustment screw
can not be accessed, raise the handle to the highest position to
make the screw visible again.
37
A