Internet Settings - D-Link DWR-920V User Manual

Section 3 - Configuration
On this page you can configure your Ethernet connection. This would be used if you have an Internet connection from a DSL, Cable, or other external
source. Note that by default, the 4G connection is used as your primary connection. If you are not sure which settings to use, please contact your
Internet Service Provider (ISP).
Ethernet Type
WAN Mode Choose this to utilize and configure
WAN Settings.
LAN Mode
Choose this to utilize 3G/4G.
WAN Mode
Select an Internet connection type for your Ethernet WAN. This information should be provided by your ISP.
If you have chosen Dynamic IP, see WAN Connection Type - DHCP (Auto Config) on page 22.
If you have chosen Static IP, see WAN Connection Type - Static IP Address Connection on page 22.
If you have chosen PPPoE, see WAN Connection Type - PPPoE (ADSL) on page 23.
D-Link DWR-920V User Manual

Internet Settings

21