Sony GX255 Operating Instructions Manual page 35

Sony operating instructions owner's record mini hi-fi component system mhc-gx555, gx355, gx255, mhc-rg575s, rg475s, rg470, rg270, rg170
Table of Contents

Advertisement

MHC-RG170
DIN power output (rated): 20 + 20 watts (6 ohms at
Continuous RMS power output (reference):
Music power output (reference):
Other models:
MHC-RG575S
The following measured at AC 120, 127, 220, 240 V
50/60 Hz
Front speaker
DIN power output (rated): 100 + 100 watts (6 ohms at
Continuous RMS power output (reference):
Sub woofer
DIN power output (rated): 120 watts (6 ohms at
Continuous RMS power output (reference):
MHC-RG475S
Front speaker
The following measured at AC 120, 127, 220, 240 V
50/60 Hz
DIN power output (rated): 100 + 100 watts (6 ohms at
Continuous RMS power output (reference):
Sub woofer
DIN power output (rated): 120 watts (6 ohms at
Continuous RMS power output (reference):
MHC-RG470
The following measured at AC 120, 127, 220, 240 V
50/60 Hz
DIN power output (rated): 130 + 130 watts (6 ohms at
Continuous RMS power output (reference):
1 kHz, DIN)
25 + 25 watts (6 ohms at
1 kHz, 10% THD)
50 + 50 watts (6 ohms at
1 kHz, 10% THD)
1 kHz, DIN)
125 + 125 watts (6 ohms at
1 kHz, 10% THD)
80 Hz, DIN)
150 watts (6 ohms at
80 Hz, 10% THD)
1 kHz, DIN)
120 + 120 watts (6 ohms at
1 kHz, 10% THD)
80 Hz, DIN)
150 watts (6 ohms at
80 Hz, 10% THD)
1 kHz, DIN)
160 + 160 watts (6 ohms at
1 kHz, 10% THD)
MHC-RG270
The following measured at AC 120, 127, 220, 240 V
50/60 Hz
DIN power output (rated): 100 + 100 watts (6 ohms at
Continuous RMS power output (reference):
MHC-RG170
The following measured at AC 120, 127, 220, 240 V
50/60 Hz
DIN power output (rated): 50 + 50 watts (6 ohms at
Continuous RMS power output (reference):
Inputs
AUDIO IN (stereo mini jack):
MIC (phone jack) (Latin American model only):
Outputs
PHONES (stereo mini jack):
VIDEO OUT (phono jack) (Mexican model only):
SPEAKER:
SUBWOOFER OUT (MHC-GX555/RG575S/
RG475S only):
CD player section
System
Laser Diode Properties
* This output is the value measurement at a distance of
200mm from the objective lens surface on the
Optical Pick-up Block with 7mm aperture.
Frequency response
Signal-to-noise ratio
Dynamic range
1 kHz, DIN)
125 + 125 watts (6 ohms at
1 kHz, 10% THD)
1 kHz, DIN)
65 + 65 watts (6 ohms at
1 kHz, 10% THD)
voltage 250 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
accepts headphones of
8 ohms or more
max. output level 1Vp-p,
unbalanced, Sync
negative, load impedance
75 ohms
accepts impedance of 6 to
16 ohms
accepts impedance of 6 to
16 ohms
Compact disc and digital
audio system
Emission duration:
continuous
Laser Output*:
Less than 44.6µW
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
continued
GB
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents