Download Print this page
Rinnai Smart Box SBOXI Installation Instructions
Rinnai Smart Box SBOXI Installation Instructions

Rinnai Smart Box SBOXI Installation Instructions

For recess enclosure & semi- recess frame

Advertisement

Quick Links

The Smart Box® (SBOX) Recess Enclosure
system is made up of two (2) components
these are the SBOXI (insert) and SBOXC
(cover). These are packed together in the one
carton.
SBOXC
If you DO NOT have a SBOXC (cover) for your
Smart Box contact your supplier.
DO NOT
Obstruct the slots provided for the Cover Clips, Support Bracket or Pipe Access
Cover
Clip
Slot
Cover
Clip
Slot
Securing Method
Securing
the
Smart
Box Insert externally
Rinnai
For Recess Enclosure SBOXI / SBOXC & Semi- Recess Frame SBOXF
To suit Rinnai REU water heater models: 1220 | 1620 | 2024 | 2426 | 2626 | 2630
SBOXI
Cover
Securing Method
A
Securing
the
Box Insert internally
through the side wall
Smart Box® Installation Instructions
Take care to AVOID exposing Smartbox
components to ANY EXCESSIVE HEAT when
welding pipes.
Cover
Access
Clip
Slot
Securing Method
B
Smart
Securing
Box Insert internally
through the rear wall
1
Clip
Slot
Pipe
Slot
Securing Method
C
the
Smart
Securing
Box Insert with the use
of brick ties
Support
Bracket
Slot
D
the
Smart
SMART BOX IM

Advertisement

loading

Summary of Contents for Rinnai Smart Box SBOXI

  • Page 1 Smart Box® Installation Instructions For Recess Enclosure SBOXI / SBOXC & Semi- Recess Frame SBOXF To suit Rinnai REU water heater models: 1220 | 1620 | 2024 | 2426 | 2626 | 2630 The Smart Box® (SBOX) Recess Enclosure system is made up of two (2) components these are the SBOXI (insert) and SBOXC (cover).
  • Page 2 Use spacers (G) (not provided) to install the Smart Box Insert, with sufficient clearance for rendering. When the render is applied ensure that the gap provided by the stand-off spacers is NOT exceeded as this will prevent the Smart Box Cover from being fitted! IMPORTANT Rinnai SMART BOX IM...
  • Page 3 BE copied to the sticker on the inside of the Smart Box Cover. The serial and model numbers are required for future service work. 3. sert the upper mounting bracket (5) of the Rinnai water heater into the bracket slot (6) located at the top of the Insert.
  • Page 4 P.O. Box 460, Braeside, Victoria 3195 AU45204 Rinnai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your Rinnai appliance. If your appliance requires service, please call our National Help Line. Rinnai recommends that this appliance be serviced at least every 2 years.

This manual is also suitable for:

Smart box sboxcSmart box sboxf