Communication with different networks
Setting the routing parameters in utility beforehand enables transient transmission to stations on different networks. Seamless
communication is also possible with the CC-Link IE Controller Network, MELSECNET/H.
CC-Link IE Controller Network
Network No.1
(Relay station)
Setting method
For Routing parameters, set on the "Routing Information Setting" (Page 108 Routing parameters)
Transient transmission range
For Multiple network system, communication with a station on up to the eighth network is possible by setting routing
parameters.
CPU
module
CC-Link
Network No.1
IE Field Network
Own
Board
station
Network No.2
CC-Link IE Field Network
(Relay station 1)
(Relay station 2)
CPU
CPU
module
module
Network No.2
CPU
CPU
module
module
CPU
CPU
module
module
Network No.9
CPU
CPU
module
module
(Relay station 8)
Set the communication route by routing parameters in advance.
(Relay station 3)
CPU
module
Network No.3
CPU
CPU
module
module
(Relay station 6)
CPU
module
Network No.7
(Relay station 7)
CPU
module
Network No.8
CPU
module
Network No.4
(Relay station 4)
Network No.5
(Relay station 5)
CPU
module
Network No.6
5 FUNCTIONS
5.3 Transient Transmission
5
69