Ge3A/Ge2A/Ge2B (Power) Boards, Bal Board, Hms2 Board, Lens And Lcd Panel Removal - Sony KDL-32EX705 Original Manual

Lcd digital color tv, chassis az1-l
Hide thumbs Also See for KDL-32EX705:
Table of Contents

Advertisement

1-4. GE3A/GE2A/GE2B (POWER) BOARDS, BAL BOARD, HMS2 BOARD, LENS AND
LCD PANEL REMOVAL
A Remove screws from Power Boards
4 from GE3A Board (KDL-32EX705/40EX705 Only)
4 from GE2B Board (KDL-46EX705/52EX705 Only)
5 from GE2A Board (KDL-60EX705 Only)
B Disconnect 5 connectors from GE3A/GE2A/GE2B (Power) Boards
C Remove 4 screws from BAL Board
D Disconnect 5 connectors from BAL Board
E Slide Side Jack Bracket to right-side to remove from BAL Board
F Lift HMS2 Board to detach from Bezel
G Slide-out Lens to detach from Bezel
H Carefully Lift up Panel to remove from Bezel
KDL-32EX705/40EX705/46EX705/52EX705/60EX705
F
G
E
H
D
C
B
A
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identi¿ ed by shading
and
!
mark are critical for safety. Replace only
with part number speci¿ ed.
151
REF. NO.
PART NO.
DESCRIPTION
151
X-2547-289-1
BEZEL (32) ASSEMBLY
(KDL-32EX705 ONLY)
151
X-2547-290-3
BEZEL (40) ASSEMBLY
(KDL-40EX705 ONLY)
151
X-2547-291-1
BEZEL (46) ASSEMBLY
(KDL-46EX705 ONLY)
151
X-2547-292-1
BEZEL (52) ASSEMBLY
(KDL-52EX705 ONLY)
151
X-2547-544-1
BEZEL (60) ASSEMBLY
(KDL-60EX705 ONLY)
152
A-1736-860-A
HMS2 BOARD, MOUNTED
153
1-856-068-11
LENS
154
NA
LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
NOTE: The components identi¿ ed by a red outline and a
con¿ dential information. Speci¿ c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
154
153
152
155
156
157
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
155
4-171-117-11
BRACKET, SIDE JACK M
156
Y-8287-132-A
BAL BOARD, COMPLETE
NOTE: For BAL Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BAL Board or LCD Panel.
NOTE: Final software is not installed on this BAL Board. Install the update
after replacing this board using the instructions provided with the software.
157
1-474-213-12
GE3A BOARD, COMPLETE
(KDL-32EX705/40EX705 ONLY)
157
1-474-212-11
GE2B BOARD, COMPLETE
(KDL-46EX705/52EX705 ONLY)
157
1-474-211-11
GE2A BOARD, COMPLETE
(KDL-60EX705 ONLY)
2-580-592-01
SCREW, +PSW M3X8
mark contain
[ASSEMBLY INCLUDES]
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdl-40ex705Kdl-46ex705Kdl-60ex705Kdl-52ex705

Table of Contents