There Is No Sound; The Remote Does Not Function; There Is No Microphone Sound; There Is Severe Hum Or Noise - Sony DHC-AZ33D Operating Instructions Manual

There is no sound.

 Press VOLUME + (or touch VOLUME

+ on the unit) repeatedly.
 The headphones are connected to the

PHONES jack .
 Check the speaker connections
(page 21).
 There is no audio output during Rec
Timer.
 The system is in pause mode, in Slow-
motion Play or in Lock Search. Press
 (or touch  on the unit)
to start the playback.

There is no microphone sound.

 Press VOLUME + (or touch VOLUME

+ on the unit) repeatedly or turn

MIC LEVEL on the unit clockwise
to adjust the microphone volume.
 Make sure the microphone is
connected to the MIC jack
correctly.
 Make sure the microphone is turned
on.

There is severe hum or noise.

 A TV or VCR is placed too close to the
unit. Move the unit away from the TV
or VCR.
 Move the unit away from the source of
noise.
 Connect the unit to a different wall
outlet.
 Install a noise filter (commercially
available) to the power cord.
The timer does not function.
 Check the timer setting and set the
correct time (page 97).
 Cancel the Sleep Timer function.

The remote does not function.

 Remove the obstacles between the
remote and the unit.
 Move the remote closer to the unit.
 Point the remote at the unit's sensor.
 Replace the batteries (R6/size AA).

 Locate the unit away from the
fluorescent light.
There is acoustic feedback.
 Reduce the volume.
 Move the microphone away from the
speakers or change the direction of the
microphone.
The color irregularity on a TV screen

persists.
 Turn off the TV set once, then turn it
on after 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.

Continued
10
GB