Table of Contents
Advertisement
finishing
EN
5.5
glass media
WARNING
!
•
Clean the glass media prior to installation. Before applying the cleaned glass, ensure that it is dry.
•
Do not change or substitute the glass media material provided with this appliance. If replacing, use only the
replacement glass media available from your local authorized dealer / distributor.
•
Glass media over the burner must not be more than one layer high. More than one layer over the burner will
cause fl ame lifting and sooting problems.
•
Do not place any media (glass or vermiculite) in or around the pilot opening. This will interfere with the pilot
operation.
Evenly spread the glass media onto the media tray, covering the burner tube and tray. Ensure no glass
media falls into the pilot opening. If this happens, insert a clean bag into your vacuum cleaner and vacuum
out the glass media. Replacement glass can be purchased from your local authorized dealer / distributor.
Glass media over the burner ports may cause a "puffi ng" sound. To eliminate this sound, simply push the
media away from the burner ports.
note:
The distribution of glass media over the burner ports will infl uence the fl ame height. When the fl ames
impinge on the glass, the glass may discolour slightly and the edges may soften.
Cleaning Glass Media
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with
mild dish soap, drain, rinse thoroughly and dry before placing over the burner.
5.6
surround installation / removal
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the appliance
and must be installed.
Lift the surround and slide the hooks into the
A.
slots on the appliance.
Let it slide down into position.
B.
note:
When installing the surround ensure no wires are
pinched or exposed.
5.7
logo placement
30
W415-1337 / B / 09.25.18
note:
Do not use more media than what was supplied with the appliance.
SAFETY BARRIER
1/2"
(12.7mm)
LOGO
1/2" (12.7mm)
46.1
SLOTS
HOOKS
- Quick Links:
- Replacement Parts
Hide quick links:
Advertisement
Table of Contents
