Table of Contents
Advertisement
Name
Function
wj -/--
Press to
– select track numbers over 10
– select channel numbers over
wk A.F.D.
Press to select sound field
(page 69).
wl 2CH/
Press to select sound field or to
A.DIRECT
switch the audio of the selected
input to analog signal without
any adjustment (page 68).
e; RESOLUTION Press RESOLUTION
repeatedly to change the
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
ea PIP
Press PIP to switch the image of
the PIP (Picture in Picture)
window. The image of the PIP
window is the one from the
EXT VIDEO IN jack. You can
swap the position of the main
screen and the PIP window by
pressing
Note
When the HDMI input is
selected on the main screen, you
cannot swap the position of the
main screen and the PIP window.
es DISPLAY
Press to display the current
status of or information on
components connected to the
receiver.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
ed RETURN/
Press to return to the previous
EXIT O
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
ef B·/·b
Press to select an album.
eg DISC SKIP
Press to skip a disc when using
a multi-disc changer.
18
GB
of the CD player, DVD
player, Blu-ray Disc Player,
or MD deck.
10 of the TV, Satellite tuner
or the VCR.
(qh).
Name
Function
eh MASTER
Press to adjust the volume level
VOL +/–
of all speakers at the same time.
TV VOL +/–
Press TV (wf), then press TV
VOL +/– to adjust the volume
level of the TV.
ej MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
ek BD/DVD/
Press to display the menus of
TOP MENU,
the DVD player on the TV
screen. Then use V/v/B/b and
MENU
operations.
MACRO 1,
Press AMP (4), then press
MACRO 2
MACRO 1 or MACRO 2 to set
up the macro function
(page 129).
a)
See the table on page 123 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (TV/5,
N, PRESET +/TV CH +). Use as a mark of
operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
to perform a menu
Advertisement
Table of Contents
