Table of Contents
Advertisement
Configuring the device
5.2 Standard Web pages
Viewing the connection status
You can view the connection status (
indicator light in the upper-right corner of the information display area of the port.
Light
Status
Normal
Read error
Partial parameter
read error
Viewing the basic parameter settings
You can view the basic parameter settings (
port information display area of the port. You can modify these parameter settings of the port
from the page for configuring the port (Page 50).
5.2.4
Quick configuration
The Web server provides you with a setup wizard for quick converter configuration, including
port configuration and MindSphere configuration.
Requirement
You can access the quick configuration page when any one of the following conditions is
met:
● You have finished setting security questions in the case of the first login.
● You have accessed the home page after a successful normal login.
Procedure
Note
• First login: The Web browser jumps to the quick configuration page automatically from
the page for setting security questions.
• Normal login: You can open the quick configuration page from the "Setup Wizard" menu
in the navigation bar on the home page.
Note
Before configuring MindSphere, make sure that you have produced the configuration file
(.txt) from the onboarding key value that is downloaded from MindSphere.
The quick converter configuration helps you with the following tasks in order:
● Task 1: configuring the desired port(s) of the device (steps 1 to 11)
● Task 2: configuring MindSphere (steps 12 to 17)
● Task 3: confirming the configuration results (steps 18 to 19)
46
Description
Communication between the device and the converter is established.
•
The device successfully reads all the parameters from the port.
•
Communication between the device and the converter fails.
•
The device reads no parameter from the port.
•
Communication between the device and the converter is established.
•
The device reads only part of parameters from the port.
•
①
in the above figure) of each port from the status
②
⑦
to
in the above figure) of a port from the
Operating Instructions, 10/2018, A5E45421408
SINAMICS CONNECT
Advertisement
Table of Contents
