Connecting From A Web Browser - JVC Connected Cam GY-HC550E Instructions Manual

Display the list of access points in the
0
wireless connection settings of the
smartphone, tablet terminal, or PC, and
select "HC550-****"A and [HC500-
****]B. (**** are numbers that vary with
the device used.)
After the password confirmation screen
0
appears, enter the [Passphrase]
displayed on the [Connection Setup]
screen.
.
o Cellular adapter connection ("USB"-
"Cellular")
Configure the settings as follows according to
the screen.
Connection phone number
0
Username
0
Password
0
Caution :
You can access the web functions via a web
0
browser on devices such as a smartphone,
tablet terminal, or PC only in a LAN environment.
Note that you may have to pay very high bills in
0
the case of pay-per-use contracts. Fixed price
contract is recommended if you are using the
network function.
Note that the use of improper settings may result
0
in expensive bills from the phone service
provider. Make sure that the setting is correct.
To avoid expensive bills due to the roaming
0
connection, you are recommended to use this
function by disabling the roaming contract.
There may be communication even when you
0
are not using the network function. Remove the
cellular adapter when the function is not in use.
3 Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
32
Connecting to the Network
Connecting from a Web
Browser
You can access the web functions of this camera
recorder via a web browser on devices such as a
smartphone, tablet terminal, or PC.
Make the necessary preparations for connection in
advance.
1 Set the camera recorder to the Camera
mode, and display [Connection Setup]
(status screen).
Press the [STATUS] button on the camera
0
recorder to display the status screen. Press
the cross-shaped button (HI) to display the
[Connection Setup] screen.
Check the displayed [IP Address].
0
2 Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the [IP Address] in the
address field.
(Example: 192.168.0.10)
If "192.168.0.10" is displayed in [IP Address],
enter "http://192.168.0.10".
http://192.168.0.10
.
3 Enter the user name and password.
Enter the user name and the password on the
login screen to display the main page of the
camera.
Check the [Web Username] and [Web
0
Password] in the [Network] screen (status
screen).
Memo :
The user name and password can be changed
0
in [Network] B [Web] B [Username] and
[Password].