Specifications - JVCKENWOOD Kenwood DDX7016BT Instruction Manual

REFERENCES REFERENCES
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) for iPod/iPhone
30-pin connector model or KCA-HD100 (optional
accessory) and KCA-iP103 (optional accessory)
through a Lightning-Digital AV adapter (accessory
of the iPod/iPhone) for iPod/iPhone Lightning
model. Other cables cannot be used.
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) for iPod/iPhone
30-pin connector model or KCA-HD100 (optional
accessory) and KCA-iP103 (optional accessory)
through a Lightning-Digital AV adapter (accessory
of the iPod/iPhone) for iPod/iPhone Lightning
model. Other cables cannot be used.
❏ Radio
AME automatic presetting does not work.
• Store stations manually. (Page 27 )
Static noise while listening to the radio.
• Connect the antenna firmly.
❏ AV-IN1/AV-IN2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
❏ Pandora*/AUPEO!
The application does not work.
• The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
* Only for DDX7016BT Region4.
70
❏ Bluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio/Video Remote Control
Profile).
The Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.
• For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page 36)
• For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try "0000" or "1234."
• Turn off, then turn on the Bluetooth device.
Echo or noise occurs.
• Adjust the microphone unit position.
• Adjust the echo volume or noise reduction
volume. (Page 37)
The unit does not respond when you try to copy
the phone book to the unit.
• You may have tried to copy the same entries (as
stored) to the unit.

Specifications

❏ Monitor section
Picture Size (W x H)
6.95 inches (diagonal) wide
156.6 mm × 81.6 mm
Display System Transparent TN LCD panel
Drive System TFT active matrix system
Number of Pixels 1 152 000 (800H × 480V × RGB)
Effective Pixels 99.99 %
Pixel Arrangement
RGB striped arrangement
Back Lighting LED