8-3. LEV,THERMISTOR (Liquid/Gas piping temperature detection)
OPERATING PROCEDURE
1.Removing the LEV.
(1) Remove the control box cover with procedure 8-1.
(2) Remove the fixing screws (five) of the heat exchanger cover
(A),and remove the cover (A).(Fig.1)
(3) Remove the LEV driving motor.(Fig.2)
2.Removing the thermistors.
(1) Remove the thermistors from the thermistor holders which
are installed on the piping.(Fig.3)
(liquid piping :large piping , gas piping :small piping)
25
Be careful on removing heavy parts.
FIGURES
Fig.1
(A)
LEV
Thermister