Playing Discs - Sony DAV-S400 Operating Instructions Manual

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD,
some operations may be different or
restricted.
Refer to the operating instructions supplied
with your disc.
POWER
POWER indicator
OPEN/
CLOSE
H
1
Turn on your TV.
2
Switch the input selector on the TV
to this system.
3
Press POWER on the system.
The system enters standby mode and
the power indicator lights up in red.
GB
30
H
A x
VOLUME PHONES
jack
1
1 2 3
4 5 6
7 8 9
> 10
10/0
x
4
Press A on the system or OPEN/
CLOSE on the remote, and place a
disc on the disc tray.
The system automatically turns on and
the power indicator turns off.
With the playback side facing down
5
Press H.
The disc tray closes, and the system
starts playback (continuous play).
Adjust the volume on the system.
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions
on the menu. (DVD (page 32), VIDEO CD
(page 33)).
To turn on the system
Press POWER on the system. The system
enters standby mode and the power indicator
lights up in red. Press 1 on the remote. The
system turns on and the power indicator
turns off. In standby mode, you can also turn
on the system by pressing A on the system
or by pressing H.
To turn off the system
Press 1 on the remote. The system enters
standby mode and the power indicator lights
up in red. To turn off the system completely,
press POWER on the system. While playing
a disc, do not turn off the system by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the system, first
press x to stop playback and then press 1
on the remote.
DAV-S400 4-240-074-12(1)