Sony CMT-A5 Operating Instructions Manual page 7

3
Note
Before playing an ATRAC
CD/MP3 CD, this player
reads all file and group
information on the CD.
Depending on the file
structure, it may take more
than a minute to read them.
During this time, "Reading"
is displayed.
Tips
• To listen through
headphones, connect the
headphones to the i
(headphones) jack.
• Playback starts from the
point you last stopped
playing (Resume play).
During stop, the point to be
played is displayed.
To start play from the
beginning of the first track,
press STOP x in stop
mode.
To cancel the resume play,
see page 26.
Press CD u (u on the remote).
The player plays all the tracks once.
Display
Audio CD
Track name*
Track number Playing time
* When playing an audio CD
containing text information
such as CD-TEXT, track name
appears on the display.
Use these buttons for additional operations
To
adjust the volume
stop playback
pause playback
go to the next track
go back to the
previous track
1
* The button has a tactile dot.
2 There is a tactile dot beside CD u on the main unit.
*
ATRAC CD/MP3 CD**
File name
File number
**When playing an MP3 CD,
"MP3" appears on the display.
?/1
CD u
–, +
STOP x
VOLUME
M/>
./m
Z OPEN/CLOSE
Do this
Turn the VOLUME control. (Press
1
VOL +* , – on the remote.)
Press STOP x (x on the remote).
Press CD u* 2
(u on the remote).
The playing time of the current track/file
flashes on the display.
Press the button again to resume play after
pause.
Press M/>.
Press ./m.
Playing time
GB
7
continued