Press the encoder to enter edit mode, the Ch1 changes to the level in dB:
This can be adjusted to the figure required using the encoder, the fader knob icon will move up and down to give a graphical representation
of the increase or decrease in gain:
The level control ranges are as follows:
•
Channels 1 and 2: –30 dB to +40 dB
•
Bluetooth: –32 dB to 0 dB
•
Main Output: –inf (off) to +10 dB
Note that when a channel is attenuated all the way down to the lowest level, -30 for inputs 1 & 2, -32 for the Bluetooth input 3 and -infinity
for the main output, it will be completely muted and the fader knob will turn red:
BLACKLINEX POWERED USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
BLACKLINEX POWERED USER GUIDE
15