Advertisement
Step 4. Remove the ODD Bay.
Using
the
enclosed
screwdriver, loosen up the three (3)
screws securing the ODD Bay.
Step 7. Hold the new ODD Bay by
the edges and align it with the
opening.
IMPORTANT! Install the
new ODD in the correct position.
Step 10.
IMPORTANT! Make sure
the three (3) mounting holes are
aligned properly.
P/N 994636800
Rev. C
VGN-FE Series Optical Disk Drive
Step 5. To initiate the removal of the
magnetic
ODD Bay, pull slightly the ODD door
as shown in the picture.
Step 8. With an even force slide in
the new ODD Bay.
Step 11. Reinstall the three (3)
previously removed screws.
Replacement Instructions
2/2
Step 6. With even force slide out
the ODD as shown. Some force
may be required to unlock the ODD
from the connector.
Step 9. Make sure the new ODD
Bay is seating flush on the edge of
the computer.
Step 12. Reinstall the battery pack.
Return the old ODD to Sony
following the included shipping
instructions.
Advertisement
