Manual Time Calibration Signal
Receive
1.
Place the watch near a window or some
other location appropriate for time signal
reception.
2.
Hold down (A) for at least 0.5 seconds.
Release the button when the second hand
moves to [RC].
This indicates that the receive operation
has started. After the receive operation is
complete, the watch's time and day
settings will be adjusted accordingly.
30
Note
The receive operation takes anywhere
●
from about two minutes to about 10
minutes. It can take as long as 20
minutes.
Time calibration signal reception is
●
better at night than during the day.
This operation cannot be performed if
●
the watch is already paired with a
phone.
Signal Reception Precautions
When the watch is unable to adjust its time
●
in accordance with a calibration signal for
some reason, average timekeeping
accuracy is within ±15 seconds per month.
Note that an internal decoding process the
●
watch performs after it receives a signal
may cause the time setting to be slightly off
(by less than one second).
Time calibration signal reception is not
●
possible under the conditions described
below.
While battery power is low
ー
At Power Saving Level 2
ー
While the crown is pulled out
ー
As of July 2018, China does not observe
●
summer time. If China starts to observe
summer time in the future, the time
displayed by the watch for China may not be
correct.
Operation Guide 5596
Using Watch Operations to
Adjust the Time Setting
Selecting a Time Zone
Use the procedure in this section to select the
time zone of the city you want to use as your
Home City.
Important!
If you do not specify the time zone
●
where you are using the watch, the
current time setting will not be correct
after it is adjusted based on a time
calibration signal.
1.
Pull out the crown to the first click.
The second hand will point to the currently
selected time zone.
The time zone is indicated as a time
●
offset. ±0 hours is indicated when the
second hand is at 12 o'clock, with other
offsets indicated when it is to the left and
right of 12 o'clock. For information about
time zone positions, go to the section
below.
City (Time Zone) List
l
Tokyo (+9 offset)
Time zone (+9 position)
2.
Rotate the crown to change the time zone.
3.
Push the crown back in to its normal
position.
Adjusting the Time and Day Setting
1.
Pull out the crown to the second click.
This enables the hour and minute setting
operation.
The second hand will indicate whether the
current time is a.m. or p.m.
●
a.m. (57-second position)
2.
Rotate the crown to adjust the hour and
minute settings.
3.
Press (A).
This enables the year ten's digit setting
operation.
4.
Rotate the crown to move the second
hand to the desired setting for the year
ten's digit.
30
5.
Press (A).
Crown
This enables the year one's digit setting
operation.
6.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
The 57-second position is a.m., while
the 3-second position is p.m.
p.m. (3-second position)
30
Crown
Year (10's digit)
00
10
20
90
30
80
40
70
50
60
Year (one's digit)
0
1
2
9
3
8
4
7
5
6
6