Safety Switch-Off - Miele KM 6639-1 Operating And Installation Instructions

Safety switch-off

Sensor controls are covered
Your hob will turn off automatically if
one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel.  flashes briefly
above the  sensor control and a tone
will sound.
 will go out once you have removed
the object and/or cleaned the hob and
the hob will be ready to use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator
appears. If you switch the cooking zone
on and off again, it is ready for
operation again.
The hob is programmed to safety
setting 0 at the factory. If required you
can set a higher safety setting with a
shorter maximum operating time (see
chart).
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
 ,, 

* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Setting
range").
** Factory default setting
Safety features
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00
10:00 7:00
5:00 4:00
5:00 3:30
4:00 2:00
4:00 1:30
4:00 1:00
4:00 0:42
4:00 0:30
4:00 0:30
1:00 0:24
4:00 0:42
4:00 0:42
2
5:00
4:00
3:00
2:00
1:30
1:00
0:30
0:24
0:20
0:18
0:10
0:24
0:24
49