Sony SA-32SE1 Operating Instructions Manual

Sony SA-32SE1 Operating Instructions Manual

Tv sound bar system
Hide thumbs Also See for SA-32SE1:

Advertisement

4-269-544-12(1)
TV Sound Bar
System
Operating Instructions
SA-32SE1/SA-40SE1/SA-46SE1
©2011 Sony Corporation

Advertisement

Table of Contents
loading

Summary of Contents for Sony SA-32SE1

  • Page 1 4-269-544-12(1) TV Sound Bar System Operating Instructions SA-32SE1/SA-40SE1/SA-46SE1 ©2011 Sony Corporation...
  • Page 2 The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. These following indications are located on the bottom exterior of the AC Adaptor.
  • Page 3: Important Safety Instructions

    Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 4 For customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
  • Page 5: About This Manual

    Notice for customers: The following information is only applicable to equipment sold in countries applying EU Directives. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
  • Page 6: Table Of Contents

    Table of Contents Supplied accessories ... 6 Guide to parts and controls ... 7 Getting started... 9 Installing a battery ...9 Hooking up the unit ...9 Installing the unit...11 Listening to TV sound from the speaker of the unit ... 13 Listening to TV sound ...13 Control the volume of the unit by adjusting the TV volume...13...
  • Page 7: Guide To Parts And Controls

    Guide to parts and controls This manual mainly explains operations using the buttons on the remote control, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit Remote control (RM-ANU102) A ?/1 (POWER) button B SOUND FIELD button Selects the sound field (page 14).
  • Page 8 When the volume level is set to maximum or minimum, the indicator flashes 6 times in quick succession. If you are using a Sony TV, the G – I operations can be performed with the remote control of the unit.
  • Page 9: Getting Started

    Getting started Installing a battery Slide and remove the battery compartment lid, and insert the two supplied R03 (size AAA) batteries, E side first, matching the polarities shown below. Notes • Do not mix an old battery with a new one or mix different types of batteries. •...
  • Page 10 Connect an audio cord and a power source. A AUDIO IN jack Connect the TV audio output jack to the AUDIO IN jack of this unit using an audio cord (supplied). If the audio output jack of your TV is not compatible with the audio cord (supplied) Connect the audio cord (supplied) to the TV audio output jack using the plug adaptor (supplied).
  • Page 11: Installing The Unit

    B DC IN 18V jack Attach the AC power cord (mains lead) (supplied) to the AC adaptor (supplied). Then plug the connector of the AC adaptor into the DC IN 18V jack on the rear of the unit. After you have made all connections, connect the AC power cord (mains lead) into the AC power outlet.
  • Page 12 Install the speaker on a vertical and flat reinforced area of the wall. • Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation.
  • Page 13: Listening To Tv Sound From The Speaker Of The Unit

    Listening to TV sound from the speaker of the unit Listening to TV sound Turn on the unit or make sure the unit is in standby mode. Turn on the TV. While the unit is in the standby mode, the unit turns on automatically when a sound of a TV is detected.
  • Page 14: Selecting The Sound Field

    Selecting the sound field Press one of the sound field buttons you want to use. You can also use SOUND FIELD button on the unit. Sound field Effect STANDARD (STD) Suitable for use for a wide range of sources of any type. MOVIE Provides dynamic sound and realistic sensation.
  • Page 15: Precautions

    Precautions On safety Should any solid object or liquid get into the unit, unplug the unit, and have it checked by qualified personnel before operating it again. On power sources • Before operating the unit, check that the operating voltage is identical with your local power supply.
  • Page 16: Troubleshooting

    Should any problem persist, consult your nearest Sony dealer. POWER The power is not turned on. • Make sure the AC adaptor and the AC power cord (mains lead) is connected correctly and firmly (page 11).
  • Page 17: Other

    OTHER The STANDBY indicator flashes. • Turn off the unit and unplug the AC power cord (mains lead) immediately. • Remove anything that is blocking the ventilation hole. If the unit still does not operate properly after performing the above measures, reset the unit as follows: Use the button on the unit for the operation.
  • Page 18 Speaker section Front speaker unit Speaker system Full range, passive radiator type Speaker unit For SA-32SE1 65 mm (2 5/8 in) (Cone type) 70 mm × 100 mm (2 7/8 in × 4 in) (Passive radiator) For SA-40SE1/SA-46SE1 65 mm (2 5/8 in) (Cone type) 65 mm (2 5/8 in) ×...
  • Page 20 Sony Corporation Printed in Malaysia...

This manual is also suitable for:

Sa-40se1Sa-46se1

Table of Contents