Table of Contents
Advertisement
COLOUR VIDEO CAMERAS
Built-in Zoom Lens Colour Video Camera
SSC-CX34P
•Especially designed for surveillance applications
•Built-in 12x switchable motorized/auto iris zoom lens
with zoom/focus preset capabilities
•The lens zoom, focus and iris functions can be remotely
controlled from an external controller/receiver
(Lens control voltage, ±6 V or ±12 V is selectable)
•Digitally-controlled Smart Control function provides
intelligent and flexible automatic backlight compensation
•High density 1/3-inch IT Hyper HAD CCD offers a high
resolution of 470 TV lines and high sensitivity with a
minimum illumination of 4.5 lx at F1.8 (50 IRE)
•Excellent signal-to-noise ratio of 50 dB
•Extra gain with Turbo AGC function, providing 6 dB
more gain than conventional AGC
•Aperture/Sharp Mode makes object outlines sharper in
the reproduced picture
•Three alternative automatic white balance control
modes: AWB (Auto White Balance) by one push /ATW
(Auto Tracing White Balance)/ATWpro
•New ATWpro mode ensures reliable white balance
control based on the absolute colour temperature of the
object (The effective operational colour range is 2500 K
to 6000 K)
Front Panel
Supplied Accessories
Tripod adaptor (1)
Lens control cable (1)
Operation manual (1)
COLOUR
12
Rear Panel
X12
BUILT-IN LENS
Built-in Zoom Lens Specifications
Lens:
12 x zoom (f = 5.4 mm ~ 64.8 mm) (F1.8 to 2.7)
Angle of view (horizontal):
48.8°(Wide) ~ 4.3°(Tele)
Angle of view (vertical):
37.6°(Wide) ~ 3.3°(Tele)
Maximum object distance:
10 mm (Wide), 800 mm (Tele)
Focus:
Manual
Lens control voltage:
6 V or 12 V selectable
Voltage polarity:
NORMAL or REVERSE switchable
Focus/Iens control:
Preset function from external remote control system
Auto iris:
ON/OFF switchable
Lens Connector Information
1. Pin Assignments
Pin number
Name
Meaning
1
Preset +
V1 = + Power for preset 12 Vp-p maximum
2
Preset -
V2 = - Power for preset 12 Vp-p maximum
3
Zoom Position Out Zoom position voltage output
4
GND
5
Focus Position Out Focus position voltage output
6
Focus In
Focus control voltage input
7
Zoom In
Zoom control voltage input
8
Iris In*
Iris control voltage input
*Note: If Iris is in auto mode, this voltage control is not accepted.
2. Lens Motion by NORM/REV switch
Switch NORM position
Focus In
+ Voltage
6-pin
- Voltage
Zoom In
+ Voltage
7-pin
- Voltage
Iris In
+ Voltage
8-pin
- Voltage
3. Position Output Motion
Position voltage increase
Zoom Position output 3-pin
Focus Position output 5-pin
Turbo
AGC
APERTURE
8
7
6
4
3
5
2
1
Voltage spec Supplied Cable Colour
V2 to V1
–
–
V2 to V1
-12 V to +12 V
-12 V to +12 V
-12 V to +12 V
Switch REV position
Far
Near
Near
Far
Wide
Tele
Tele
Wide
Close
Open
Open
Close
Position voltage decrease
Tele side
Wide side
Far side
Near side
6V/ 12V DC
w/potentiometer
EXT. LENS CONT.
Red
White
Black
Yellow
Blue
Green
Brown
Grey
Hide quick links:
Advertisement
Table of Contents
