IBM System 360 User Manual page 100

If either the password or the account (or both) is a null field,
enter an asterisk to indicate its absence. For examp le, to add the
following entry:
SMITH
•
null
~
null
PRt7
enter
add (smith
* *
pr07)
In addition to the user identification, password, account., and
procedure name, you can enter one or more of the following operands:
Operand
SIZE (integer)
UNIT (name)
MAXSIZE(integer)
ACCT
OPER
JCL
Meaning
Region size (in units of 1024 bytes) of the procedure
added. For .example for a 10K region size specify
SIZE(10). If you omit this parameter the minimum
region size established by the installation is
assumed.
The name of the group of devices that can be used for
the user's data set.
The maximum region size (in units of 1024 bytes) that
the user can request when he logs on. If you omit
this parameter, no maximum 1imi t is enf orced.
Authorization
to
use the ACCOUNT command.
Authorization to use the OPERATOR command.
Authorization to use the SUBMIT,
S~TUS,
CANCEL, and
OUTPUT commands.
You can use the MAXSIZE, ACCT, OPER, and JCL operands of the ADD
subcommand only when you are adding a complete entry to the UADS. (See
section "Change SUbcommand" for description of modifying these four
operands.)
For example, if you want to add the following entry
BROWN
t
null
•
DEPT 5
+
PR37
and you also want to establish the region size for PR37 as 12K, and
authorize the user to submit background jobs, enter:
add (brown
*
dept5 pr37) size(12) jcl
94 TSO Terminal User"s Guide (Release 21)