Mechanical Instructions - Philips VE8 Service Manual

EN 8 4. Q529.1A LA

4. Mechanical Instructions

Index of this chapter:
4.1 Cable Dressing
4.2 Service Positions
4.3 Assy/Panel Removal VE8 Styling
4.4 Set Re-assembly.
4.1 Cable Dressing
4.2 Service Positions
For easy servicing of this set, there are a few possibilities
created:
• The buffers from the packaging (see figure "Rear cover").
• Foam bars (created for Service).
4.2.1 Foam Bars
Required for sets
1
42"
Figure 4-2 Foam bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. See figure "Foam
Mechanical Instructions
Figure 4-1 Cable dressing
1
E_06532_018.eps
171106
Notes:
• Figures below can deviate slightly from the actual situation,
due to the different set executions.
bars" for details. Sets with a display of 42" and larger, require
four foam bars [1]. Ensure that the foam bars are always
supporting the cabinet and never only the display.
Caution: Failure to follow these guidelines can seriously
damage the display!
By laying the TV face down on the (ESD protective) foam bars,
a stable situation is created to perform measurements and
alignments. By placing a mirror under the TV, the screen can
be monitored.
I_17670_003.eps
280408