Page 2
NetComm accepts no responsibility for any loss or damage resulting from errors or delays in transmission or reception, or the failure of the NetComm common identifier and device name to transmit or receive such data.
The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts. Prerequisites Before continuing with the installation of your NL1901ACV, please confirm that you meet the minimum system requirements below. An activated ADSL/VDSL or pre-configured WAN connection.
Welcome Thank you for purchasing a NetComm NL1901ACV. This guide contains all the information you need to configure your device. Product overview Fully featured hybrid LTE/ DSL gateway VDSL2/ ADSL2+ Embedded 4G LTE Cat 4 / 3G module 1x Gigabit Ethernet WAN port New generation 802.11 AC1600, dual band concurrent WiFi - designed to provide a powerful wireless...
UFB ready Featuring VDSL2/ADSL2 technologies as well as 4G LTE connectivity and a Gigabit WAN port, the NL1901ACV is an all-in-one triple play smart gateway that provides access to all nbn (National Broadband Network) and UFB...
Media sharing Connect a USB device to the NL1901ACV gateway, access and share all A/V media and file content with all of the connected devices in the house in real time. The NL1901ACV becomes the media hub of the house using DLNA/UPnP standard and enhanced wireless capabilities to create a reliable high-speed home network.
Page 12
Enter the current Username and New Username, the Old Password and New Password and re-enter the new password in the Confirm Password field and click Apply/Save to apply the new settings. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 12 of 146 UG01063 v.
User interface elements are found on the front, back and left side (viewed from the front) of the gateway device. Front The front of the NL1901ACV has a row of icons with LED lights behind them that provide information about the NL1901ACV’s current status and network activity.
Page 14
D E F I N I T I O N I N D I C A T O R A C T I V I T Y Power After the NL1901ACV is powered on while it is initialising (normally 1-2 minutes). Green The NL1901ACV is powered on and operating normally.
Do not place the device in direct sunlight or in hot areas. Transport and handling When transporting the NL1901ACV, it is recommended to return the product in the original packaging. This ensures that the product will not be damaged. Attention – In the event the product needs to be returned, ensure it is securely packaged with appropriate padding to prevent damage during courier transport.
If you have concerns about your network’s performance that might be related to range or obstruction factors, try moving the computer to a position between three to five meters from the NL1901ACV in order to see if distance is the problem.
If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your NL1901ACV to channel 11. See your phone’s user manual for detailed instructions.
NL1901ACV. Note – Refer to the included Wireless Security Card for the default SSID and wireless security key of your NL1901ACV. When prompted for your wireless security settings, enter the Wireless security key configured on the NL1901ACV.
At the login screen, type admin in the username and your NL1901ACV’s serial number (located on the label pasted on the back of the device) into the password field, then click the Login button.
Refer to the Mobile Network section on page 30. Select ADSL and click the Next button. Figure 6 – NL1901ACV gateway – Select ADSL as WAN connection type NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 23 of 146 UG01063 v.
For more information on setting up fallback protection and unlocking the SIM, refer to the Mobile Network section on page 30. Click the Finish button. The account settings are saved and the NL1901ACV connects to the internet. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 24 of 146 UG01063 v.
Refer to the Mobile Network section on page 30. Select VDSL and click the Next button. Figure 10 – NL1901ACV gateway – Select VDSL as WAN connection type NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 25 of 146 UG01063 v.
Mobile Network section on page 30. Note – If you select Bridging mode the Enable Mobile Broadband Backup (SIM card fallback protection) option is not available. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 26 of 146 UG01063 v.
Refer to the Mobile Network section on page 30. Connect an RJ45 Ethernet cable to the WAN port on the NL1901ACV. Connect the other end of the cable to your WAN service.
SIM, refer to the Mobile Network section on page 30. Figure 18 – Ethernet WAN connection – Enter User ID and Password Click Finish to view the setup Summary. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 28 of 146 UG01063 v. 1.0 December 2018...
SIM, refer to the Mobile Network section on page 30. Click the Next button to display details of the settings in a Summary page. Click Apply/Save to activate the NL1901ACV’s connection to the internet. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 29 of 146 UG01063 v.
Select Unlock with PIN code (if it is not already selected) Type in your four numeral code into the Enter PIN code field Click the Submit button. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 30 of 146 UG01063 v. 1.0 December 2018...
Page 31
Click the Next button. Enter the APN assigned by your carrier and, if required, enter a username and password. Click the Apply/Save button to activate the NL1901ACV’s connection to the internet. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 31 of 146 UG01063 v.
When you log in to the gateway, the Device Info summary page is displayed, giving a general overview of the status of the gateway and the WAN connection. Device Info Figure 22 – NL1901ACV gateway – Device Info section I T E M D E F I N I T I O N...
WAN Connection Status Figure 23 – NL1901ACV gateway – WAN connection status section I T E M D E F I N I T I O N Line Rate – Upstream (Kbps) The current synchronisation upstream speed of the DSL connection in Kbps (Kilobits per second).
ADSL/VDSL/Ethernet WAN be interrupted, this table will show the device status when this LTE service is being used. Figure 24 – NL1901ACV gateway – Cellular Network connection status section I T E M...
The WAN page shows more detailed information related to the WAN interface configuration, including the firewall status, IPv4 and IPv6 addresses of the gateway. Figure 25 – NL1901ACV gateway – WAN Info list I T E M D E F I N I T I O N Interface The Interface of the WAN connection.
The Statistics – WAN Service page shows detailed information about the number of bytes, packets, errors and dropped packets on the WAN interface in both directions of communication. Figure 27 – Device Info – Statistics – WAN Service display NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 36 of 146 UG01063 v. 1.0 December 2018...
You can use this to determine when a specific DHCP lease will expire, or to assist you with setting up Static DHCP addressing. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 39 of 146 UG01063 v. 1.0 December 2018...
The CPU & Memory page shows real-time graphs charting the physical memory usage and the work load of the CPU. Figure 33 – Device Info – CPU & Memory display NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 40 of 146 UG01063 v. 1.0 December 2018...
PTM interface is used for VDSL connections. Figure 36 – DSL PTM Interface list Click the Add button to create a new PTM interface. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 42 of 146 UG01063 v. 1.0 December 2018...
Figure 38 – ETH WAN interface list WAN Service Note – When eth4 - ETH WAN Layer 2 interface is removed, the ETH WAN port will behave as an additional Ethernet LAN port. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 43 of 146 UG01063 v.
To disable VLAN tagging, place input value of -1. Refer to your ISP for VLAN information as required by your Internet Service Provider. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 44 of 146 UG01063 v. 1.0 December 2018...
Enter the PPPoE authentication details as required by your Internet Service Provider and click the Next button. Figure 42 – Enter PPP over Ethernet details NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 45 of 146 UG01063 v. 1.0 December 2018...
Figure 43 – Enter IP over Ethernet details Select the NAT Translation settings as desired and click the Next button. Figure 44 – Enter PPP over Ethernet NAT Translation settings NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 46 of 146 UG01063 v. 1.0 December 2018...
If one already exists, either click the Edit button or click the Remove button and then click the Add button. Both the Add and the Edit buttons open the Mobile Broadband setup dialog. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 48 of 146 UG01063 v.
Table 17 – DSL ATM Interface Configuration settings table Note – Mobile Broadband service requires an unlocked SIM card in the 2FF format. See PIN settings section on the next page. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 49 of 146 UG01063 v.
P A R A M E T E R D E F I N I T I O N IP Address Enter the Local IP Address to use for the NL1901ACV. Subnet Mask Enter the subnet mask to define the subnet of the Local Network.
To set a DHCP reservation, enter the MAC Address of the chosen host and IP to use and then click Apply/Save. The NL1901ACV enables you to set the DHCP options which are provided to hosts attempting to connect to the DHCP server.
(RS) requests onto the network to discover available gateways. The radvd software answers requests with gateway advertisement (RA) messages. In addition, NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 53 of 146 UG01063 v. 1.0 December 2018...
Enter the VLAN ID and in the Pbits field enter a value from 0-7 indicating the priority of the VLAN. Click Apply/Save when you have finished. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 54 of 146 UG01063 v. 1.0 December 2018...
Select Enable LAN Loopback to make the virtual server available on Loopback the LAN side. In this way the user on the LAN side can access service NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 55 of 146 UG01063 v. 1.0 December 2018...
Click the Add button and configure the port settings from an existing application in the drop-down list or create your own custom application. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 56 of 146 UG01063 v. 1.0 December 2018...
DMZ Host The NL1901ACV will forward IP packets from the Wide Area Network (WAN) that do not belong to any of the applications configured in the Virtual Servers table or being used in the Virtual Server table to the DMZ host.
We recommend that you leave these protocols enabled unless you have a specific reason for disabling them. Figure 58 – NAT – Application Layer Gateway (ALG) settings NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 58 of 146 UG01063 v. 1.0 December 2018...
To create a new outgoing IP filter, click Add. The Add IP Filter-Outgoing page will be displayed. Figure 61 –Outgoing IP Filter settings NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 59 of 146 UG01063 v. 1.0 December 2018...
MAC Filtering The NL1901ACV offers the ability to use MAC Address filtering on ATM PVCs. You can elect to block or allow connections based on MAC Address criteria. The default policy is to allow all connections. Figure 63 – Security – MAC Filter list Click Add to enter a new MAC Address filter.
Time server synchronization as described in the SNTP section, so that the scheduled times match your local time. Figure 65 – Advanced – Parental Control – Time Restriction To add a time restriction rule, press the Add button. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 62 of 146 UG01063 v. 1.0 December 2018...
Select the Black List (to block) or White List (to allow) option and then click Add to enter the URL you wish to add to the URL Filter list. Figure 67 – Advanced – Parental Control – URL Filter NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 63 of 146 UG01063 v. 1.0 December 2018...
By configuring QoS Port Shaping with a Burst size, web pages are allowed to load using the burst speed, while continuous traffic such as file downloads will be shaped at a lower rate. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 67 of 146 UG01063 v.
Page 68
Apply/Save button Click to save and apply your changes Figure 76 – Advanced – QoS – Port Shaping settings Note: 1 byte = 8 bits NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 68 of 146 UG01063 v. 1.0 December 2018...
The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings. Figure 78 – Routing – Static Route list NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 69 of 146 UG01063 v. 1.0 December 2018...
Click the Add button to add a policy rule. The following screen is displayed. Figure 81 – Advanced – Routing – Policy Route configuration NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 70 of 146 UG01063 v. 1.0 December 2018...
Figure 89 – UPnP activation page Note – This UPnP functionality is only available when there is a live WAN service with NAT enabled. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 76 of 146 UG01063 v. 1.0 December 2018...
The DLNA page allows you to enable or disable and configure the digital media server. This means you can have digital media stored on an external USB hard drive connected to the NL1901ACV and the gateway will make it accessible to other devices on your network.
To add an account, click the Add button and then enter the desired username and password for the account. Figure 94 – Storage User Account Setup page NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 78 of 146 UG01063 v. 1.0 December 2018...
Enter a group name and then use the arrow buttons to select which interfaces you wish to group. Click Apply/Save to save the Interface grouping configuration settings. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 79 of 146 UG01063 v. 1.0 December 2018...
Your ISP must support the DS-Lite IPv4inIPv6 tunnelling service, to enable this feature Figure 99 – IPv4inIPv6 Tunnel list Click the Add button to add a new tunnel. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 80 of 146 UG01063 v. 1.0 December 2018...
Configure advanced IKE settings for the IPSec tunnel such as the encryption method or key life time. Table 33 – IPsec settings table NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 82 of 146 UG01063 v. 1.0 December 2018...
When this time expires, the host replies with a report, provided that no other host has responded yet. This accomplishes two purposes: NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 83 of 146 UG01063 v. 1.0 December 2018...
Leave Group message from an IGMP host. Table 34 – Multicast settings table NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 84 of 146 UG01063 v. 1.0 December 2018...
Wireless WiFi 2.4GHz/WiFi 5GHz The NL1901ACV gateway allows you to maintain separate wireless settings for both 2.4GHz and 5GHz wireless services. Select the service you will use (or both) and separately configure them using nearly identical configuration pages: 2.4 GHz Wireless Configuration...
Clients Isolation Select to prevent clients on the wireless network being able to access each other. Disable WMM Select to prevent the NL1901ACV advertising its WMM QoS Advertise function Enable Multicast Wireless Multicast Forwarding can reduce latency and improve Forwarding (WMF) throughput for wireless clients.
Wireless – Security The NL1901ACV supports all encryptions within the 802.11 standard. The factory default is WPA2-PSK. The NL1901ACV also supports: WPA, WPA-PSK, WPA2 or WPA2-PSK You can also select to disable WPS mode. Figure 105 – Wireless Security The following parameters are available:...
Note – While giving a wireless network some additional protection, MAC filtering can be circumvented by scanning a valid MAC and then spoofing one's own MAC into a validated one, using MAC Filtering may lead to a false sense of security. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 88 of 146 UG01063 v.
Select the mode for the Wireless Access Point built into the NL1901ACV. You can specify which wireless networks will be allowed to connect to the NL1901ACV by using the Bridge Restrict option and then entering the applicable MAC Addresses of the other wireless access points.
Advanced Wireless allows you to configure detailed wireless network settings such as the band, channel, bandwidth, transmit power, and preamble settings. Figure 109 – Wireless – Advanced configuration page NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 90 of 146 UG01063 v. 1.0 December 2018...
Page 93
This provides a more reliable transmission but increases traffic load, which decreases performance. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 93 of 146 UG01063 v. 1.0 December 2018...
Table 37 -Wireless – Advanced configuration settings Wireless – Station Info This page shows the MAC address of authenticated wireless stations that are connected to the NL1901ACV and their status Figure 110 – Wireless – Station Info list NL1901ACV Enhanced Hybrid 4G LTE Gateway –...
Voice This section explains how to configure the VoIP settings of the NL1901ACV. VoIP Status The Voice Status page displays the registration status of your SIP accounts and the total call time of each account. Figure 111 – Voice Status page NL1901ACV Enhanced Hybrid 4G LTE Gateway –...
If you are unsure about a specific setting or have not been supplied information for a particular field, please contact your VoIP service provider to verify if this setting is needed or not. Figure 112 – SIP Basic Settings page NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 96 of 146 UG01063 v. 1.0 December 2018...
SIP account and if you have the appropriate call features and other functionality on your cordless or corded phone handsets. Figure 113 – Voice- SIP Advanced settings NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 98 of 146 UG01063 v. 1.0 December 2018...
This page allows you to configure various settings regarding the logging levels of the SIP service. Figure 116 – SIP Debug Settings page NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 103 of 146 UG01063 v. 1.0 December 2018...
Dial *67 to enable anonymous call. Hook on the receiver, and dial another extension as you like. Now your caller ID information is blocked. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 104 of 146 UG01063 v. 1.0 December 2018...
Press FLASH to hold the first party. Dial #90 + third party number. Before the third party answering the call, hook on your phone. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 105 of 146 UG01063 v. 1.0 December 2018...
Press FLASH to put the first party on-hold. Dial a third party. After the third party answers the call, press FLASH again to invite the first party. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 106 of 146 UG01063 v. 1.0 December 2018...
If T.38 support is disabled, faxing uses normal voice codec as its coding approach. Therefore, this mode is more like normal phone calls. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 107 of 146 UG01063 v. 1.0 December 2018...
Diagnostics – Start/Stop DSL This page lets you stop or start the DSL service for troubleshooting purposes. Figure 121 – Diagnostics – Start/Stop DSL page NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 111 of 146 UG01063 v. 1.0 December 2018...
Management Management – Settings The Settings screens allow you to back up, retrieve and restore the default settings of your NL1901ACV gateway. It also provides a function for you to easily update your gateway’s firmware. Backup The following screen appears when Backup is selected. Click the Backup Settings button to save the current configuration settings.
Configure Log Output To configure the system log’s content and destination click the Configure System Log button. Figure 126 – Management – Configure System Log NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 113 of 146 UG01063 v. 1.0 December 2018...
The Security log page allows you to view the security log of the gateway and reset its content. The security log primarily tracks the history of access to, or attempts at accessing, the NL1901ACV gateway. Click Reset to clear the current log. Once reset it will resume recording log in details from that time forward.
MIB browser on a local host to obtain information from the SNMP agent, in this case the NL1901ACV (if SNMP is enabled). An SNMP ‘community’ performs the function of authenticating SNMP traffic. A ‘community name’ acts as a password that is typically shared among SNMP agents and managers.
Drop down to select existing time server to use, or select “Other” to manually enter time server. Click the “Apply/Save” button to initiate the change. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 119 of 146 UG01063 v. 1.0 December 2018...
Access Control is used to control local and remote management settings for your gateway. Passwords The Passwords option configures your account access username and password for your NL1901ACV gateway. Use the fields illustrated in the screen below to change or create change either the username or the password, or both.
Click the Apply/Save button after making any changes to continue. Note – You should change your default password, before enabling a WAN service. Figure 135 – Service Control List (SCL) NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 122 of 146 UG01063 v. 1.0 December 2018...
Figure 136 – Update Firmware page Management – Reboot This option reboots the NL1901ACV. Please allow up to 5 minutes for device to reboot. Figure 137 – Reboot button Note 1. – It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable the Dynamic Host Configuration Protocol (DHCP) server you will need to apply Static IP settings to your Network interface card (NIC).
Logout Click the Logout link to terminate your connection to the NL1901ACV gateway. The menu on the left margin will disappear and the following message will display in the NL1901ACV web page: Figure 138 – Successful log out confirmation message Reconnect To re-establish your connection to the gateway, click your browser’s...
You may then see a window prompting you to setup a "HomeGroup". Click "Cancel" on this. You can verify your wireless connection by clicking the "Wireless Signal" indicator in your system tray. After clicking on this, you should see an entry matching the SSID of your NL1901ACV with "Connected" next to it.
Make sure that the NL1901ACV power adaptor is connected to the device and plugged in to an appropriate power source. Use only the supplied power adaptor. Check that the NL1901ACV and the power source are both turned on and device is receiving sufficient power.
Table 50 – Login Username and Password trouble shooting table WLAN Interface I cannot access the NL1901ACV from the WLAN or ping any computer on the WLAN. S T E P C O R R E C T I V E A C T I O N Check the WiFi LED on the front of the unit and verify the WLAN is enabled as per the LED Indicator section.
The following Quality of Service (QoS) settings offer a basic setup example, setting up 2 devices connecting to an NL1901ACV gateway, one with the highest priority for data and the other with the lowest priority for data. All other data packet traffic through the gateway assumes a default best effort setting.
Page 129
Figure 140 – DHCP Static IP Lease details Click the Apply/Save button. Complete steps 4 through 7 for each device connected to the NL1901ACV gateway. Each entry will be listed in the Static IP Lease List as shown below. Figure 141 – LAN Setup NL1901ACV Enhanced Hybrid 4G LTE Gateway –...
Select Advanced > Quality of Service > QoS Queue > Queue Configuration. Figure 143 – QoS – Queue List Click the Add button. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 130 of 146 UG01063 v. 1.0 December 2018...
Page 133
Enter a Destination IP Address if the connection is to a single device. This is useful for VPN connections. If you wish the destination IP address to be any address, leave the field blank. NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 133 of 146 UG01063 v.
Select Advanced Setup > Quality of Service > QoS Classification. Click the Add button. Figure 148 – QoS Network Low Priority Traffic Class Rule configuration NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 134 of 146 UG01063 v. 1.0 December 2018...
Page 135
Enter the Set Rate Limit in Kilobits Per Second (kbps). Click the Apply/Save button. You now have 2 Quality of Service rules implemented for 2 devices connecting to the NL1901ACV gateway. Figure 149 – QoS Classification setup page Select Management > Reboot. Click the Reboot button to restart the gateway and save the new settings.
Figure 13 – VDSL connection – Enter PPPoE User ID and Password ............................26 Figure 14 – NL1901ACV gateway – Ethernet WAN connection setup ............................27 Figure 15 – NL1901ACV gateway – Select Ethernet WAN as WAN connection type ........................27 Figure 16 – Select WAN mode for Ethernet WAN connection ..............................28 Figure 17 –...
Page 140
Figure 113 – SIP Basic Settings page ......................................96 Figure 114 – Voice- SIP Advanced settings ....................................98 Figure 115 – SIP Extra Setting page ......................................102 NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 140 of 146 UG01063 v. 1.0 December 2018...
Page 141
Figure 155 – QoS Queue Configuration ..................................... 137 Figure 156 – Network Traffic class Rule ..................................... 137 Figure 157 – QoS Classification list ......................................138 NL1901ACV Enhanced Hybrid 4G LTE Gateway – User Guide 141 of 146 UG01063 v. 1.0 December 2018...
You are permitted to use this Manual for the sole purpose of using the NetComm product to which it relates. Otherwise no part of this Manual may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it electronic, mechanical, recording or otherwise, without the prior written permission of NetComm Limited.
Section 3 above), the Product Warranty is automatically voided if: you, or someone else, use the product, or attempt to use it, other than as specified by NetComm Limited; the fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power supply or communication line, whether caused by thunderstorm activity or any other cause(s);...