Sony VPL-VW11HT Operating Instructions Manual page 10

Location and Function of Controls
How to use the adjuster
To adjust the height
Adjust the height of the projector as follows:
1
Lift the projector and press the adjuster buttons.
The adjusters will extend from the projector.
Adjuster buttons
2
While pressing the buttons, lower the projector.
Then, release the buttons. The adjuster will be
locked, then the height of the projector will be
fixed.
For fine adjustment, turn the adjusters to the right
and the left.
3
If necessary, turn the rear adjusters to the right and
the left to adjust the height of the projector.
10
(GB)
Notes
• Be careful not to let the projector down on your
fingers.
• Do not push hard on the top of the projector with the
adjusters out.
• When the adjusters are not extending from the
projector, loosen the screws by hand.