Page 1
Data Projector Operating Instructions Mode d’emploi du Memory Stick Manual de instrucciones VPL-CX5 2002 Sony Corporation 4-090-336-41(1) for Memory Stick de Memory Stick...
Table of Contents Overview Features ... 4 Precautions ... 4 About This Manual ... 4 About a Memory Stick ... 5 Setting Up Using the Memory Stick ... 7 Operating the MS Home ... 8 Viewing the Slide Sliding Material for a Presentation —...
(DCF -compatible) recorded by a digital camera and a MPEG1 movie file recorded by the Sony MPEG MOVIE etc. You can set the effect of the slide when it is displayed, and the way (automatic or manual) the slide is exchanged.
• Image files (DCF-compatible) compressed in the JPEG (Joint Photographic Experts Group) format (extension .jpg). • The Sony Projector Presentation file (SPP file), which is an original file format of Sony. This file integrates information such as the destination and the setting information of the image file, etc.
Page 6
USB cable or remove the Memory Stick. This may damage the data. About the supplied Memory Stick Sample data for a presentation is memorized. About a Memory Stick • Memory Stick and are trademarks of Sony Corporation. • MagicGate Memory Stick and trademarks of Sony Corporation.
B Setting Up Using the Memory Stick Insert the Memory Stick into the Memory Stick slot on the side of the projector. To remove the Memory Stick When the access lamp is turned off, press the Memory Stick and remove your hand.
Operating the MS Home The initial display for MS input is the MS Home. The MS Home is used for setting and executing an event (e.g., selecting the viewer), setting the Autorun and Startup and formatting the Memory Stick. The guide for the key operation is displayed at the bottom of the MS Home display.
B Viewing the Slide Sliding Material for a Presentation — Presentation Viewer After you have converted Microsoft PowerPoint files by the Projector Station for Presentation to the file which offers the most advantages for projection on the projector, you can make a slide show. For details on making the presentation material, see the Operating Instructions of the Projector Station for Presentation (CD-ROM, supplied).
Page 10
Select “Presentation Viewer”, then press the ENTER key. Select “Select Contents”, then press the ENTER key. The Select Contents menu appears. MS Home Select Presentation Viewer Slide Show Option Index Display Normal Select Contents Presentation1 The Presentation Viewer can select the “contents” in units of a folder in which multiple JPEG files are contained.
Switching the File Display Mode You can display one picture file only (Normal mode) or thumbnails of picture files (Thumbnail mode). 1 Select “Index Display” in the MS Home, then press the ENTER key. 2 Select the setting, then press the ENTER key. Normal: to display a picture file Thumbnail: to display thumbnails of the picture files contained in the selected contents.
You can make the slide show by using still picture files (DCF-compatible) in the JPEG format recorded by a digital camera or movie picture files in the MPEG1 format recorded by the Sony MPEG MOVIE etc. For details on the operations regarding the picture files, see “Operating the Picture File”...
Page 13
Select “Picture Viewer”, then press the ENTER key. Thumbnails of the picture files contained in the selected folder appear. MS Home Select Picture Viewer Picture viewer Slide Show Option Index display Normal Select Contents 100MSDCF No.: 1/1234 Size: 1024x768 : Appears when a file is protected. : Appears when a startup file is set.
Page 14
Press the , key to select the Select Folders menu. MS Home Select Picture Viewer Slide Show Option Select Contents Select the folder for your presentation, then press the ENTER key. The title name and the first picture file of the selected folder are displayed. To select the folders which are not displayed, press the , key to select the slider in the Select Folders menu and press the m or M key.
Page 15
To execute the slide show When “Advan. Slds.” in the slide show setting is set to “Auto”, the slides change automatically. When a movie file is selected, the movie plays back automatically, and after playback the next slide is displayed automatically. When you want to end the slide show, press the MS SLIDE or ENTER key.
• The Movie Player cannot be displayed when “Advan. Slds.” is set to “Auto”. • The unit can play back a MPEG1 movie file recorded by the Sony MPEG MOVIE, etc. (Movies may occasionally skip when you watch them.) Usable MPEG1 files: MPEG MOVIE AD/EX/HQ/CV, MPEG1 of VAIO Giga pocket (equivalent to a video CD).
Page 17
When a movie file is selected by pressing the < or , key, the Movie Player appears on the screen. Operate the Movie Player as follows: [Movie Player] Prev. Next Full Screen Menu MS Home No.: 1/1234 Size: 320x240 N (play/pause): to play back. During playback, the button display is changed to the X (pause) button.
Executing the Slide Show Promptly As the settings are memorized even if you change the input after the setting of steps 1 to 3, press the MS SLIDE key on the Remote Commander just as you start the presentation. The input is changed to MS and the slide show starts promptly.
B Setting/Displaying the Picture File Operating the Picture File To operate the picture file, display the index screen (see pages 20 and 21. ) When the Presentation Viewer is displayed To display the index screen, select the contents in the normal or thumbnail display mode, then press the ENTER key.
Page 20
Index screen of a still picture file MS Home Select Picture Viewer Slide Show Appears when a Option file is protected Select Contents Appears when a startup file is set Total number of picture files in the current content Order in the current content To select a picture file in the thumbnail display mode, press the M/m/</, key.
Page 21
Index screen of a full-screen still picture file Information Delete Total number of picture files in the current content Order in the current content Appears when a file is protected Appears when a startup file is set If you want to display another picture file when multiple picture files are contained in the current content, press the , key.
Protecting an Important File After selecting the file you want to protect, set “Protect” to “On” or “All On”. When a file is protected, the protect mark is displayed. Rotating a Picture File After selecting the file you want to rotate, set “Rotate”. The picture rotates 90°...
When the Presentation Viewer is displayed, the number and size (resolution) of the picture file are displayed. When the Picture Viewer is displayed, the number, size (resolution), file format and recorded date of the picture file are displayed. Note For a picture file processed on a computer, the renewal date may be displayed instead of the recorded date.
• This function does not work if more than 2000 picture files recorded by a digital camera are stored in a • For a picture file recorded with theVoice Memo function of the Sony digital camera, the still picture file is displayed only.
Starting a Presentation Automatically — Autorun When the Memory Stick with the picture file for which the Autorun function is set by the Projector Station for Presentation is inserted in the Memory Stick slot, the input is automatically switched to MS and the slide show starts.
Projecting a Selected File When the Power is Turned on — Startup When the power is turned on, the selected picture file is projected for about one minute. When you want to use the registered picture file as the startup file, you must register a picture file as the startup file in the index screen (see page 22.) Select “Option”...
B Operating Memory Stick Displaying the Memory Stick Information You can display the type and the used and remaining capacity of the Memory Stick in use. The remaining capacity of the also displayed at the right bottom of the MS Home. Select “Option”...
Formatting a Memory Stick When a Memory Stick cannot be used, format it by the projector. When a Memory Stick is formatted, its data is cleared. Select “Option” in the MS Home, then press the ENTER key. Select “Memory Stick”, then press the , or ENTER key. Press the ENTER key again.
B Other Troubleshooting If you have a problem with the MS Home, check the following. If the problem persists, contact your nearest Sony dealer. Problem Cannot insert the Memory Stick into the drive. Cannot save a file. Cannot delete a file.
Page 30
On Display When the following displays appear in the screen, make the material for a presentation again by using the Projector Station for Presentation. Troubleshooting The picture file is in the JPEG format or MPEG format unacceptable. There is a thumbnail that it is not DCF-compatible. There is no selected picture file.
Page 33
Table des matières Présentation Caractéristiques ... 4 Précautions ... 4 A propos de ce manuel ... 4 Utilisation d’un Memory Stick ... 5 Configuration Utilisation du Memory Stick ... 7 Utilisation de la fonction Origine MS ... 8 Affichage de la diapositive Diapositives de présentation —...
Memory Stick. Précautions • Pour éviter toute perte de données, effectuez fréquemment des copies de sauvegarde. Sony ne sera en aucun cas responsable d’éventuelles pertes de données. • Les enregistrements non autorisés peuvent s’avérer contraires aux dispositions de la législation sur les droits...
Photographic Experts Group) avec l’extension .jpg. • Fichiers de présentation Projector Sony (également appelés dans ce manuel, fichiers SPP). Ce format Sony intègre des informations, telles que la destination de stockage, certains des paramètres du fichier image, etc. Avant d’utiliser un Memory Stick...
Page 36
A propos du Memory Stick fourni Les données échantillon d’une présentation sont enregistrées. • Memory Stick et sont des marques déposées de Sony Corporation. • MagicGate Memory Stick et des marques déposées de Sony Corporation. sont...
B Configuration Utilisation du Memory Stick Insérez le Memory Stick dans l’emplacement prévu à cet effet sur le côté du projecteur. Pour retirer le Memory Stick Si le témoin d’accès est éteint, appuyez sur le Memory Stick et retirez votre main.
Utilisation de la fonction Origine MS L’affichage initial du MS est Origine MS. La fonction Origine MS est utilisée pour la configuration et l’exécution de l’événement (par exemple, sélection du visualiseur), la configuration de l’exécution automatique et du démarrage ainsi que l’initialisation du Memory Stick. Le guide des opérations de base est affiché...
B Affichage de la diapositive Diapositives de présentation — Visualiseur de présentation Après avoir converti des fichiers Microsoft PowerPoint avec le Projector Station for Presentation en fichiers offrant les principales qualités requises pour la projection sur le projecteur, vous pouvez réaliser un diaporama. Pour obtenir davantage de détails sur le support de présentation, consultez le mode d’emploi du Projector Station for Presentation (CD-ROM fourni).
Page 40
Sélectionnez “Visual. présent.”, puis appuyez sur la touche ENTER. Sélectionnez “Sél. contenu”, puis appuyez sur la touche ENTER. Le menu Sél. contenu apparaît. Origine MS Sélection Visual. présent. Diaporama Option Affichage index Normal Sél. contenu Presentation1 Le visualiseur de présentation peut sélectionner le “contenu” sous forme d’unités d’un dossier dans lequel se trouvent de nombreux fichiers JPEG.
Sélectionnez “Diaporama”, puis appuyez sur la touche ENTER. Sélectionnez “Exécuter”, puis appuyez sur la touche ENTER. Passer au mode d’affichage des fichiers Vous pouvez afficher un seul fichier image (mode Normal) ou des miniatures des fichiers image (mode Miniatures). 1 Sélectionnez “Affichage index” dans l’écran Origine MS, puis appuyez sur la touche ENTER.
(compatible DCF) au format JPEG enregistrés par une caméra numérique ou des fichiers d’images vidéos au format MPEG1 enregistrés par le MPEG MOVIE de Sony etc. Pour obtenir plus de détails sur les fonctions des fichiers image, reportez-vous à la section “Ouverture du fichier image”...
Page 43
Sélectionnez “Visualiseur d’image”, puis appuyez sur la touche ENTER. Les miniatures des fichiers image contenus dans le dossier sélectionné apparaissent. Origine MS Sélection Visualiseur d'images Picture viewer Diaporama Option Index display Normal Sél. contenu 100MSDCF 1/1234 Ampl: 1024x768 : apparaît lorsqu’un fichier est protégé : apparaît lorsqu’un fichier de lancement est défini : Icône Image vidéo Sélectionnez “Sél.
Page 44
Appuyez sur la touche , pour sélectionner le menu Sélectionner dossiers. Origine MS Sélection Visualiseur d'images Diaporama Option Sél. contenu Sélectionnez le dossier pour votre présentation, puis appuyez sur la touche ENTER. Le titre et le premier fichier image du dossier sélectionné apparaissent.
Page 45
Pour lancer le diaporama Lorsque l’option “Diapo avan.” du réglage du diaporama est réglée sur “Auto”, les diapositives changent automatiquement. Lorsqu’un fichier vidéo est sélectionné, la vidéo est lue automatiquement, puis, après la lecture, la diapositive suivante est automatiquement affichée. Si vous souhaitez terminer le diaporama, appuyez sur la touche MS SLIDE ou sur la touche ENTER.
• Le lecteur vidéo ne peut pas être affiché lorsque “Diapo avan.” est réglé sur “Auto”. • L’appareil peut lire un fichier vidéo MPEG1 enregistré par le MPEG MOVIE de Sony, etc. (il est possible que les vidéos sautent parfois pendant la lecture.) Fichiers MPEG1 compatibles : MPEG MOVIE AD/EX/HQ/CV, MPEG1 du VAIO Giga pocket (équivalent à...
Page 47
Pour lancer le diaporama Appuyez sur les touches suivantes. , : pour afficher la diapositive suivante < : pour afficher la diapositive précédente MS SLIDE : pour mettre fin au diaporama Lorsqu’un fichier vidéo est sélectionné à l’aide de la touche < ou ,, le Lecteur vidéo apparaît sur l’écran.
Pour effectuer une lecture en écran complet Sélectionnez “Écran Complet”, puis appuyez sur la touche ENTER. L’image est agrandie sur l’ensemble de l’écran et la lecture commence. Lorsque vous appuyez sur les touches M, m, <, , ou ENTER en cours de lecture, le Lecteur vidéo réapparaît sur l’écran.
B Réglages/Affichage des fichiers image Ouverture du fichier image Pour ouvrir le fichier image, affichez l’écran d’index. (Voir pages 20 et 21.) Si le visualiseur de présentation est affiché Pour afficher l’écran d’index, sélectionnez le contenu en mode d’affichage Normal ou Miniatures, appuyez ensuite sur la touche ENTER. Vous pouvez agrandir un fichier image sur l’écran complet en utilisant le menu de l’écran d’index.
Page 50
Ecran d’index d’un fichier d’image fixe Sélection Visualiseur d'images Apparaît lorsqu’un fichier est protégé Apparaît lorsqu’un fichier Sél. contenu de lancement est défini Nombre total de fichiers image du contenu en cours de lecture Ordre du contenu en cours de lecture Pour sélectionner un fichier image en mode d’affichage des miniatures, appuyez sur la touche M/m/</,.
Page 51
Ecran d’index d’un fichier d’image fixe en écran complet Informations Nombre total de fichiers Suppr. image du contenu en cours de lecture Ordre du contenu en cours de lecture Apparaît lorsqu’un fichier est protégé Apparaît lorsqu’un fichier de lancement est défini e Résolution Si vous souhaitez afficher un autre fichier image alors de nombreux fichiers image se trouvent dans le contenu en cours de lecture, appuyez sur la touche...
Protection d’un fichier important Après avoir sélectionné le fichier à protéger, réglez “Protect.” sur “Act” ou “Tt act”. Lorsqu’un fichier est protégé, le symbole de protection est affiché. Rotation d’un fichier image Après avoir sélectionné le fichier que vous souhaitez faire pivoter, sélectionnez “Rotation”.
informations, sélectionnez “Dés”. Lorsque le visualiseur de présentation est affiché, le nombre et la taille (résolution) du fichier image apparaissent. Lorsque le visualiseur d’images est affiché, le nombre, la taille (résolution), le format du fichier et la date enregistrée du fichier image apparaissent. Remarque Pour un fichier image traité...
Memory Stick. • Pour un fichier image enregistré avec la fonction Voice Memo de l’appareil photo numérique Sony, seul le fichier d’image fixe est affiché. Affichage des fichiers image enregistrés par une caméra numérique uniquement Mode photo num.
Lancement automatique d’une présentation — Exé. Auto Lorsque le Memory Stick contenant le fichier image pour lequel la fonction Exé. Auto est activée par le Projector Station for Presentation, est inséré dans l’emplacement Memory Stick, l’entrée est automatiquement commutée sur MS et le diaporama commence.
Projection d’un fichier sélectionné lorsque le projecteur est sous tension — Lancement A la mise sous tension, le fichier image sélectionné est projeté pendant environ 1 minute. Si vous souhaitez utiliser le fichier image enregistré en tant que fichier de lancement, vous devez enregistrer un fichier image en tant que fichier de lancement dans l’écran d’index (voir page 22).
B Utilisation du Memory Stick Affichage des informations relatives au Memory Stick Vous pouvez afficher le type, ainsi que la capacité utilisée et la capacité restante du Memory Stick en cours d’utilisation. La capacité restante du Memory Stick est également affichée en bas à droite de l’écran Origine Sélectionnez “Option”...
Formatage d’un Memory Stick Si un Memory Stick ne peut pas être utilisé, réinitialisez-le à l’aide du projecteur. Lors de l’initialisation du Memory Stick, les données sont effacées. Sélectionnez “Option” dans Origine MS, puis appuyez sur la touche ENTER. Sélectionnez “Memory Stick”, puis appuyez sur la touche , ou ENTER.
B Autres informations Dépannage Si vous rencontrez des problèmes dans Origine MS, vérifiez ce qui suit. Si le problème persiste, contactez votre revendeur Sony le plus proche. Problème Cause et solution Impossible d’insérer le • Le Memory Stick n’a pas été inséré dans le bon sens.
Page 60
Affichage Si les indications suivantes s’affichent à l’écran, réalisez de nouveau le support de présentation à l’aide du Projector Station for Presentation. Dépannage Le fichier image est au format JPEG ou MPEG et ne peut pas être utilisé. La vignette est affichée mais elle n’est pas compatible DCF. Aucun fichier image n’est sélectionné.
Page 63
Índice Descripción general Características ... 4 Precauciones ... 4 Acerca de este manual ... 4 Acerca de los Memory Stick ... 5 Instalación Uso del Memory Stick ... 7 Funcionamiento de la página Inicio MS ... 8 Visualización de la diapositiva Material de diapositivas para una presentación —...
• La grabación no autorizada puede ir en contra de lo establecido por las leyes de copyright. • Sony puede modificar o cambiar el software de aplicación de los Memory Stick sin previo aviso. Acerca de este...
DCF) comprimidos en el formato JPEG (Joint Photographic Experts Group) (extensión .jpg). • Archivo de presentación de proyector Sony (archivo SPP), que es un formato de archivo original de Sony. Este archivo integra información, como el destino y la información de configuración del archivo de imagen, etc.
Page 66
Acerca de los Memory Stick Acerca del Memory Stick suministrado Dispone de datos de muestra memorizados para una presentación. • Memory Stick y son marcas comerciales de Sony Corporation. • MagicGate Memory Stick y marcas comerciales de Sony Corporation.
B Instalación Uso del Memory Stick Inserte el Memory Stick en la ranura para Memory Stick del lateral del proyector. Para extraer el Memory Stick Cuando el indicador de acceso esté apagado, presione el Memory Stick y retire la mano. Extraiga el Memory Stick cuando se haya liberado el bloqueo.
Funcionamiento de la página Inicio MS La pantalla inicial de entrada de MS es la página Inicio MS. La pantalla Inicio MS se emplea para configurar y ejecutar el evento (por ejemplo, seleccionar el visor), definir las funciones de ejecución automática y arranque e inicializar el Memory Stick.
B Visualización de la diapositiva Material de diapositivas para una presentación — Visor de presentaciones Después de convertir archivos de Microsoft PowerPoint mediante Projector Station for Presentation en el archivo que ofrece el mayor número de ventajas para proyectarlo en el proyector, podrá realizar la presentación de diapositivas.
Page 70
Seleccione “Visor pres.” y pulse la tecla ENTER. Seleccione “Sel. cont.” y pulse la tecla ENTER. Aparecerá el menú Sel. cont. Inicio MS Selec. Visor pres. Diapos. Opción Present. Índice Normal Sel. cont. Presentation1 El Visor de presentaciones puede seleccionar el “contenido” en unidades de una carpeta con varios archivos JPEG.
Cambio del modo de visualización de archivos Puede visualizar un solo archivo de imagen (modo Normal) o miniaturas de los archivos de imagen (modo Miniatura). 1 Seleccione la opción “Present. Índice” en Inicio MS y, a continuación, pulse la tecla ENTER. 2 Seleccione el ajuste y pulse la tecla ENTER.
(compatibles con DCF) en el formato JPEG grabado con una cámara digital o archivos de imagen de película en el formato MPEG1 grabados con Sony MPEG MOVIE, etc. Para obtener detalles sobre las operaciones relacionadas con archivos de imagen, consulte “Funcionamiento del archivo de imagen”...
Page 73
Seleccione “Visor de imágenes” y pulse la tecla ENTER. Aparecerán miniaturas de los archivos de imagen de la carpeta seleccionada. Inicio MS Selec. Visor de imágenes Picture viewer Diapos. Opción Index display Normal Sel. cont. 100MSDCF Num.: 1/1234 Tamaño: 1024x768 : Aparecerá...
Page 74
Pulse la tecla , para seleccionar el menú Seleccionar carpetas. Inicio MS Selec. Visor de imágenes Diapos. Opción Sel. cont. Seleccione la carpeta para la presentación y pulse la tecla ENTER. Aparecerán el título y el primer archivo de imagen de la carpeta seleccionada. Si desea seleccionar las carpetas que no se muestran, pulse la tecla , para seleccionar la barra de desplazamiento del menú...
Para ejecutar la presentación de diapositivas Si la opción “Av. diap.” del ajuste de presentación de diapositivas se ajusta en “Auto”, las diapositivas cambian automáticamente. Si se selecciona un archivo de película, la película se reproduce automáticamente. Después de la reproducción, aparecerá...
• La unidad puede reproducir un archivo de película MPEG1 grabado mediante Sony MPEG MOVIE, etc. (Es posible que ocasionalmente se produzcan saltos en las películas durante su reproducción.) Archivos MPEG1 que se pueden utilizar: MPEG MOVIE AD/EX/HQ/CV, MPEG1 de VAIO Giga pocket (equivalente a un CD de vídeo)
Page 77
Si se selecciona un archivo de película mediante la tecla < o ,, aparecerá el Reproductor de películas en la pantalla. Utilice el Reproductor de películas de la siguiente manera: [Reproductor de películas] Ant. Sig. Pant. Completa Menú Inicio MS Num.: 1/1234 Tamaño: 320x240...
Ejecución inmediata de la presentación de diapositivas Puesto que los ajustes se memorizan incluso si se cambia la entrada después del ajuste de los pasos 1 a 3, pulse la tecla MS SLIDE del mando a distancia en el momento en el que se inicia la presentación. La entrada se cambia a MS y la presentación de diapositivas se inicia inmediatamente.
B Ajuste/Visualización de un archivo de imagen Funcionamiento de un archivo de imagen Para utilizar un archivo de imagen, visualice la pantalla de índice. (Consulte las páginas 20 y 21.) Si se visualiza el Visor de presentaciones Para visualizar la pantalla de índice, seleccione el contenido en el modo de visualización Normal o Miniatura y pulse la tecla ENTER.
Page 80
Pantalla de índice de un archivo de imagen fija Selec. Visor de imágenes Diapos. Aparece cuando un Opción archivo está protegido Aparece cuando un archivo se ha ajustado Sel. cont. como archivo de inicio Número total de archivos de imagen en el contenido actual Orden en el contenido actual...
Page 81
Pantalla de índice de un archivo de imagen fija en modo de pantalla completa Inicio MS Information Sí Protec. Rotar Iniciar Borrar Cerrar Número total de archivos de imagen en el contenido actual Orden en el contenido actual Aparece cuando un archivo está...
Protección de un archivo importante Tras seleccionar el archivo que desee proteger, ajuste “Protec.” en “Sí” o “Todo sí”. Cuando un archivo está protegido, se muestra la marca de protección. Giro de un archivo de imagen Tras seleccionar el archivo que desee girar, ajuste “Rotar”. La imagen gira 90°...
información del archivo de imagen, seleccione “Sí”. La información aparecerá en la parte inferior de la pantalla. Si no desea visualizarla, seleccione “No”. Si se visualiza el Visor de presentaciones, aparecerán el número y el tamaño (resolución) del archivo de imagen. Si se muestra el Visor de imágenes, aparecerán el número, el tamaño (resolución), el formato y la fecha de grabación del archivo de imagen.
2.000 archivos de imagen grabados con una cámara digital. • Para un archivo de imagen grabado con la función Voice Memo de una cámara digital Sony, sólo aparecerá el archivo de imagen fija. Visualización sólo de los archivos de imagen grabados con una cámara digital Modo cámara digi.
Inicio automático de una presentación — Ejecución automática Cuando se inserta en la ranura para Memory Sticks el Memory Stick con el archivo de imagen para el que se ha establecido la función de ejecución automática mediante Projector Station for Presentation, la entrada cambia automáticamente a MS y se inicia la presentación de diapositivas.
Proyección de un archivo seleccionado con la alimentación activada — Inicio Al activar la alimentación, el archivo de imagen seleccionado se proyecta durante un minuto aproximadamente. Cuando desee utilizar el archivo de imagen registrado como archivo de inicio, es preciso registrar un archivo de imagen como archivo de inicio en la pantalla de índice (consulte la página 22).
B Funcionamiento del Memory Stick Visualización de la información del Memory Stick Es posible visualizar el tipo y la capacidad utilizada y restante del Memory Stick que se está utilizando. La capacidad restante del Memory Stick también se muestra en la parte inferior derecha de Inicio MS. Seleccione “Opción”...
Formateo de un Memory Stick Cuando no pueda utilizar un Memory Stick, formatéelo mediante el proyector. Los datos se borran al formatear el Memory Stick. Seleccione “Opción” en la página Inicio MS y pulse la tecla ENTER. Seleccione “Memory Stick” y pulse la tecla , o ENTER. Pulse la tecla ENTER de nuevo.
B Otros Solución de problemas Si tiene cualquier problema con la página Inicio MS, realice las siguientes comprobaciones. Si el problema persiste, consulte con el proveedor Sony más próximo. Problema Causa y solución No es posible insertar el • El Memory Stick no está orientado en el sentido correcto.
Page 90
Indicaciones en pantalla Si las siguientes indicaciones aparecen en pantalla, cree el material de presentación de nuevo mediante Projector Station for Presentation. Solución de problemas El archivo de imagen está en un formato JPEG o MPEG no compatible. Hay una que no es compatible con DCF. No hay ningún archivo de imagen seleccionado.