Precautions; Installing And Connecting The Projection Tv - Sony KP-43T70C Service Manual

Precautions

Installing and Connecting the Projection TV (continued)
Safety
• Operate the projection TV only on 110-
220 V AC.
• The plug is designed, for safety purposes,
to fit into the wall outlet only one way. If
you are unable to insert the plug fully
into the outlet, contact Sony Authorized
Service Center.
• If any liquid or solid object should fall
inside the cabinet, unplug the projection
TV immediately and have it checked by
Sony Authorized Service Center before
operating it further.
• If you will not be using the projection TV
for several days, disconnect the power by
pulling the plug itself. Never pull on the
cord.
2

Installing and Connecting the Projection TV

Carrying Your Projection TV
Carrying the projection TV requires three or
more people.
For KP-53SV70A/53SV70C/61SV70C
The projection TV has been equipped with
casters for easy movement on a hard surface.
Please move your projection TV using the
casters.
Note on cleaning
Clean the cabinet of the projection TV with a
dry soft cloth. To remove dust from the
screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with a cloth
slightly dampened with solution of mild
soap and warm water. Never use strong
solvents such as thinner or benzine for
cleaning.
If the picture becomes dark after using the
projection TV for a long period of time, it
may be necessary to clean the inside of the
projection TV. Consult qualified service
personnel.
Installing the Projection TV
Recommended viewing area
(Horizontal)
60
60 60
– 8 –
Installing
• To prevent internal heat buildup, do not
block the ventilation openings.
• Do not install the projection TV in a hot
or humid place, or in a place subject to
excessive dust or mechanical vibration.
• Avoid operating the projection TV at
temperatures below 5° C (41° F).
• If the projection TV is transported
directly from a cold to a warm location,
or if the room temperature changes
suddenly, the picture may be blurred or
show poor color. In this case, please wait
a few hours to let the moisture evaporate
before turning on the projection TV.
• To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling
or to cover the windows that face the
screen with opaque drapery. It is
desirable to install the projection TV in a
room where the floor and walls are not of
a reflective material.
Recommended viewing area
(Vertical)
20
20
3