Projecting
This section describes how to operate the projector to view the picture from the
equipment connected to the projector. It also describes how to adjust the
quality of the picture to suit your taste.
Projecting the Picture on the Screen
1
Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I/1 (on/standby) switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
Refer to the operating instructions of the connected equipment.
LIGHT
INPUT
DYNAMIC
STANDARD
CINEMA
PICTURE MODE
USER 1
USER 2
USER 3
ENTER
ON/
STANDBY
ON/
STANDBY
Zoom ring
4
Remote control detector
Focus ring
2
Lights in red.
Lights in green.
Projecting the Picture on the Screen
23
GB