Sony KP 48S70 Operating Instructions Manual page 31

Channel
After AUTO SET UP, you can erase unnecessary
Skip/Add channels from the channel preset memory.
With the Channel Skip/Add window open:
Skips unnecessary
channels. 1 Press V or v to select the desired channel. You can
view the channel that is selected with the Channel
Skip/Add menu in the sub screen. You can also use
CH +/– or 0–9 and ENTER buttons.
2 Press
3 Press V or v to select Skip, and press
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
Add.
Select Yes to signal the projection TV to automatically program all receivable
Auto Program
channels. When all the receivable channels are stored, the lowest numbered
Automatic
channel is displayed.
channel presetting
Select No to cancel Auto Program.
Select On if your projection TV is connected to a cable system.
Cable
Select Off if your projection TV is connected to an antenna.
Cable system
setting
.
C h a n n e l S k i p / A d d
ch
1 : S k i p
2 : S k i p
3 : A d d
4 : A d d
5 : A d d
6 : A d d
7 : A d d
8 : A d d
9 : A d d
Select a channel
Move Select Exit
.
MENU
27