Advertisement
If you connect two VCRs, you can record from one VCR to the other while
using your LCD projection TV to monitor what is being recorded.
Using AUDIO
and VIDEO cables, connect
the playback
VCR's
Audio
and Video OUT jacks to the recording
VCR's
Audio and Video IN
jacks.
Using AUDIO
and VIDEO cables, connect
the recording
VCR's
AUDIO and Video OUT jacks to the LCD projection
TV's AUDIO
and
VIDEO
IN jacks.
VCR (playback)
1
Rear of LCD projection
TV
VCR (recording)
LINE
IN
LINE
OUT
OUT
i
I:t_
1
AUDIO-LvIDEO
(yellow)(White)
...........................
............................
VC-810S/820S
(not supplied)
To perform tape editing, set the LCDprojection TV to the video input
intendedfor playback by pressing TV/VlDEOon the remote control.
You may need to change the video input on your VCR.Consult your
VCR'soperating manual for instructions.
If your VCRs havean S VlDEOjack: For best picture quality, use an
S VIDEOconnection instead of the yellow video cable on your combined
A/V cable.
Using an S VIDEOcable, connect the playback VCR'sS VIDEOOUTjack
to the recording VCR'sS VIDEO INjack. S VIDEOdoes not provide audio,
so audio cables must be connected to provide sound.
You cannot record signals from equipment connected to the Y,PB,PR
input.
32
Advertisement
