When Installing Your Tv Against A Wall - Sony KDS-Z60XBR5 Operating Instructions Manual

When using other TV stands
Table-Top
Stand
2
3 3
1
1
Screw the support belt (supplied) to the TV
stand with a wood screw (supplied).
2
Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3
Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial
1 3
screws / to / inch (3 to 4 mm) diameter to fit to the
8 16
TV stand. Consult your dealer about the types of
screw(s).

When Installing Your TV against a Wall

Keep your TV at least 4 inches (10 cm) away from
the wall to provide proper ventilation. Blocking
the ventilation opening of the cooling fan may
damage the TV.
TV
stand
4 inches
(10 cm)
Never install the TV as follows:
~
• Do not install the TV near any ventilation, as it may
affect the normal TV operating temperature.
• Be sure that the ventilation opening on the side of the
TV is not blocked by curtains or other materials.
• Dirt may accumulate near the ventilation when the TV
is placed against the wall depending on its material.
12 inches
(approx. 30 cm)
Air circulation is blocked.
Air blown into cooling fan.
4 inches
(10 cm)
11