Advertisement
Thumbnail Screen
Click a thumbnail in the screen to preview an enlarged version.
Preview Screen
The following operations can be done on the enlarged display.
• [b] [B]. Click to display the previous or next image.
• [To Thumbnail Screen]. Click to go to the Thumbnail screen.
Changing the Print Size of the UP-D70A
Printer
You can change the print size used UPA-D70A printer.
Changing the print size is done in the [Setting – H/W – Printer – UP-D70A]
screen. For details about how to use the Configuration Utility, refer the User's
Guide.
Use this screen to set the print size of the UP-D70A printer. Touching the [Size]
button toggles the setting between [8×10] and [8×12].
Note
Use print pack UPC-747 when you select [8×12].
You can set the data format of images scanned from photographs or film.
This setting is done with Configuration Utility. You can adjust the settings in
the [Setting – H/W – Scanner – UY-S90/100] screen (film scanner) or in the
[Setting – H/W – Scanner – FlatbedScanner] screen (flatbed scanner). For
details about how to access the Configuration Utility, refer to the User's Guide.
You can select from [JPEG] or [BMP] format for images scanned from
photographs or film. Touching the [Format] button toggles the selection
between [JPEG] and [BMP].
You can enter two, 20-characater lines of text that appear at the bottom of
receipts. Specify the text of your annotation in the Configuration Utility,
[Setting – Receipt – Text strings] screen. For details about the Configuration
Utility, refer to the User's Guide.
[To Thumbnail Screen]
Touch the [Text strings1] button (text entry of the first line) or touch the [Text
strings2] button (text entry of the second line) to open the text input screen.
Follow the procedure from Step 5 of "Annotating Images".
7
Setting the Image Format when Scanning
Annotating Receipts
Advertisement
