Installing The Printer Driver Program - Sony UP-D71XR Instructions For Use Manual

When connecting a printer via the parallel
interface
to -AC IN
AC power
cord
When connecting a printer via the SCSI
interface
to -AC IN
AC power
cord
Note
If the printer is connected at the physical end of the SCSI
bus, set the built-in terminator to ON ("Setting the DIP
Switches" on page 9).
10
Connections
to PARALLEL DATA
Parallel data cable
(shielded type)
Computer
to SCSI
SCSI cable
(shielded type)
Computer
Installing the Printer Driver
Program
The printer driver program should be installed before
starting operation.
The instruction manual for the printer driver for the UP-
D71XR Digital Film Imager is stored on the CD-ROM
supplied with the printer.
For detailed information, read the ReadMe file on the
CD-ROM.