Sub Assembly Case (Front) - Sony Ericsson K610m Working Instructions

Working Instruction, Mechanical
2.1.3

Sub Assembly Case (Front)

Remove the four inside screws from the rear case by using
torx bit no. 6.
R ,
EPLACE THE SCREWS IF THEY ARE DAMAGED OTHERWISE
!
THEY CAN BE REUSED
Gently but firmly move the guitar pick along the gap,
starting at the camera key.
Continue forward with the guitar pick until the front case is
loose on this side.
The snap hooks to be released are located as indicated by
the black arrows.
Continue up and around the corner and forward on to the
opposite side, starting at the system connector, and repeat
the two steps above.
3/000 21-1/FEA 209 544/109 B 9(53)
©
Sony Ericsson Mobile Communications AB