Table of Contents
Advertisement
After you have activated the timer, all
the displays will switch off after a few
minutes to save energy.
Press the button to switch the dis-
play back on again for a few minutes.
The time up until the programme starts
will show counting down in the display
in hours for durations above 10 hours,
and in minutes for durations below this.
At the end of the delay period, the pro-
gramme selected begins automatically.
The time remaining will appear in the
display, the Timer indicator light will
go out.
How the delay start period is shown
in the display:
up to 59 minutes:
e.g. 30 minutes = :
1 hour up to 9 hours 30 minutes:
e.g. 5 hours = :
over 10 hours:
e.g. 15 hours =
Starting a programme before the
delay start period has elapsed:
A programme can be started before the
delay start period has elapsed.
Proceed as follows:
Switch the dishwasher off with the
button.
Switch the dishwasher on again with
the button.
Select the programme you want.
Press the Start button.
The programme starts. The Start indic-
ator light will come on.
Options
53
Advertisement
Table of Contents
