Sony MPD-AP20U User Manual page 44

5
Repeat steps 3 to 4 to select other tracks.
6
Press and hold the RPT/ENT button until playback starts.
Listen to the tracks that you programmed.
Confirming the contents of the program
When creating a program
1
Before performing step 6 above, press the RPT/ENT button repeatedly.
Each time that you press the RPT/ENT button, the track and playback numbers
are displayed.
When playing back the programmed tracks
1
Press the PLAY MODE button repeatedly until "PGM" blinks on the remote
control display.
2
Press the RPT/ENT button repeatedly.
Each time that you press the RPT/ENT button, the track and playback numbers
are displayed.
Notes
• After you program the 64
programmed appears instead of "000".
• If you program more than 64 tracks, the program is overwritten from playback number one.
44
th
track in step 4 above, the track number of the first track that you