Advertisement
Quick Links
Key Features:
• Allows for a wall or ceiling mounting of an Sx80
speaker system
• Available in black (Sx80SMB), white (Sx80-
SMB-W), and natural finish stainless (Sx80-
SMB-U)
• Recommended for use with Sx80PI and Sx80-
PIX
General Description:
The Electro-Voice® Sx80SMB is a stainless steel mounting
bracket for installing the Sx80 loudspeaker on a wall or a ceil-
ing. The kit consists of two nylon washers, two friction wash-
ers, two M6 x 20mm phillips hex washer head screws, and one
U-bracket.
Sx80SMB
Stainless Steel
Mounting Bracket Kit
Technical Specifications:
Wall/Ceiling
Three in-line 6.35mm (0.25") diameter clearance
Mounting Holes:
holes, centers spaced 152mm (6.0") apart
Enclosure
Two 6.35mm (0.25") diameter clearance holes,
Mounting Holes:
on the ends of the bracket
Material: 8-Gauge 316 Stainless Steel
Finish: Sx80SMB - Black Powder Coat
Sx80SMB-W - White Powder Coat
Sx80SMB-U - Natural Finish Stainless Steel
Parts Supplied: (2) Nylon Washers
(2) Friction Washers
(2) M6 x 20mm Phillips Hex Wshr Head Screws
(1) U-Bracket
Dimensions: 406.4mm x 210.6mm x 40.1mm
(16.00" x 8.29" x 1.58")
Net Weight: 1.15 kg (2.53 lb)
Shipping
1.60 kg (3.53 lb)
Weight:
Advertisement
Related Manuals for Electro-Voice Sx80SMB
Summary of Contents for Electro-Voice Sx80SMB
-
Page 1: Technical Specifications
Sx80SMB Stainless Steel Mounting Bracket Kit Key Features: • Allows for a wall or ceiling mounting of an Sx80 speaker system • Available in black (Sx80SMB), white (Sx80- SMB-W), and natural finish stainless (Sx80- SMB-U) • Recommended for use with Sx80PI and Sx80- General Description: Technical Specifications: The Electro-Voice® Sx80SMB is a stainless steel mounting Wall/Ceiling Three in-line 6.35mm (0.25”) diameter clearance bracket for installing the Sx80 loudspeaker on a wall or a ceil- Mounting Holes: holes, centers spaced 152mm (6.0”) apart ing. The kit consists of two nylon washers, two friction wash- ers, two M6 x 20mm phillips hex washer head screws, and one Enclosure Two 6.35mm (0.25”) diameter clearance holes, Mounting Holes: on the ends of the bracket U-bracket. Material: 8-Gauge 316 Stainless Steel Finish: Sx80SMB - Black Powder Coat... - Page 2 Wall/Ceiling Mounting Instructions: Fig. 1 - Attaching the Sx80SMB to the Sx80 Speaker System Refer to Figure 1 and the Parts List for the following steps. 1. Attach the U-bracket (D) to the wall or ceiling using fasteners that are suitable for the wall or ceiling material (not supplied). Figure 2 is a dimensional drawing of the U-bracket. It gives dimensions for the bracket size, the mounting holes, and the holes used to attach the speaker to the bracket. 2. Remove the paper backing from one of the friction wash- ers (B) and attach these to the U-bracket as shown. Be sure that the through holes on the friction washers line up with the through holes on the U-bracket. 3. Remove the hole plugs from the top and bottom of the Sx80 for the U-bracket by gently prying with a small screw- driver. 4. Mount the Sx80 to the U-Bracket with the supplied M6 screws (C), ensuring that the nylon washers (A) are mounted between the U-bracket and the screws. 5. Rotate the speaker so that the input terminal is accessible and attach the wires. Position the speaker for the de- sired angle and tighten the screws sufficiently so that the speaker does not inadvertently rotate.