Shb; Shb Connector - Sundance Spas SMT398 User Manual

Version 1.1.1
Additional information on the standard is available in the
Guide chapter 12: Communication ports and the Texas Instrument Module
Specification.

SHB

SHB Connector

The SMT398 includes 4 60-pin connectors to provide SHB communication to the
outside world.
All 60 pins of a SHB connector are routed to the Virtex II 3000 and above version of
the SMT398.
SMT398s with a smaller Virtex II (1000 to 2000) only provide access to 25 pins per
SHB Connector, which represents the minimum amount required to implement 1 SDB
interface.(See Sundance SDB
The bigger the FPGA, the more pins from the SHB Connector become available
Features:
High-speed socket strip: QSH-030-01-L-D-A-K on the SMT398, mates with
QTH-030-01-L-D-A-K
QTH are used for cable assembly or PCB connecting 2 TIMs.
Centreline: 0.5mm (0.0197")
QSH Connector
An adapter is available for Agilent probes for the 16760A Logic Analyser.
The 2 probes supported are the E5378A 100-pin Single-ended Probe and the
E5386A Half Channel Adapter with E5378A.
You can find information on the mechanical and electrical specifications of the probe
in the User's Guide available from:
http://www.cos.agilent.com/manuals/pdf/16760705.PDF
Also see page 213 of the Help Volume for the 16760A for specifications:
http://www.cos.agilent.com/manuals/help25/help16760.pdf
Page 24 of 38
specification.)
SMT398 User Manual
TMS320C4x User's