Creating Your Own Program (Program Play) - Sony CFD-ZW150 Operating Instructions Manual

Creating your
own program
(Program Play)
You can make a program of up to 20
tracks in the order you want them to be
played.
Tips
• When using the remote
(CFD-ZW160/ZW200
only), you can select
the track by pressing
the number buttons
instead of AMS/
SEARCH =/+
and DISPLAY/ENTER.
• You can play the same
program again, since
the program is saved
until you open the disc
compartment.
• You can record your
own program. After
you've created the
program, insert a blank
tape into deck B and
press r on deck B to
start recording.
CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
CD
1
Press CD.
"Cd" appears in the display.
2
Press PLAY MODE until "PGM" appears in the
display.
3
Press AMS/SEARCH =or + then press
DISPLAY/ENTER for the tracks you want to
program in the order you want. You can program
up to 20 tracks.
Programed track
4
Press ^ to start program play.
To cancel Program Play
Press PLAY MODE until "PGM" disappears from the
display.
To check the order of tracks before play
Press DISPLAY/ENTER.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press p once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a new program following the programing
procedure.
PLAY MODE ^ =/+
Playing order
The CD Player
15