Choosing The Power Sources - Sony CFD-V30L Operating Instructions Manual

Setting Up
Choosing the
power sources
You can use the AC power or batteries as
a power source.
Use the AC power source whenever you
record since recording consumes much
power.
Tip
Only for the
customers supplied
with an AC plug
adaptor:
Use the supplied AC
plug adaptor if the plug
of the AC power cord
does not match your
outlet.
16 EN
Setting Up
CFD-V20/V30/V30L.E.G_3-859-117-3X.CED/CEK/EE1/SP5/KR2/E23/EA1/HK2
Battery compartment
Connecting the AC power cord
Insert one end of the supplied AC power cord to the
AC IN socket located at the rear of the player, and the
other end to the wall outlet.
Adjusting the voltage (only for the models
equipped with the VOLTAGE SELECTOR at the
bottom )
Be sure to set the VOLTAGE
SELECTOR (at the bottom) to
your local power supply.
CFD-V30/V30L only: Inserting batteries into
the remote
Insert two R6 (size AA) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about
six months. When the remote no longer operates the
player, replace all the batteries with new ones.
AC IN
To a wall outlet