System Configuration Screen Options - Dell Latitude 7200 2-in-1 Service Manual

Option Description
Unobtrusive Mode This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resume normal
operation, press Fn+F7 again. This option is disabled by default.
Miscellaneous Allows you to enable or disable the following devices:
Devices
•
•
•
•
•

System Configuration screen options

Option Description
Integrated NIC Allows you to controls the on-board LAN controller. The options are:
•
•
•
Drives Allows you to configure the various drives on board. All drives are enabled by default. The option is:
•
SMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
USB Configuration
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
•
Dell Type-C dock Allows you to enable docks. The options are:
configuration
•
•
•
80 System setup
Enable Front Camera—enabled by default
Enable Back Camera—enabled by default
Secure Digital (SD) card—enabled by default
Secure Digital (SD) card boot
Secure Digital (SD) card read-only-mode
DisabledThe internal LAN in off and not visible to the operating system.
EnabledThe internal LAN is enabled.
Enabled w/PXEThe internal LAN is enabled (with PXE boot). This option is enabled by default.
M.2 2230 PCI-e SSD
Enable SMART Reporting
Enable USB Boot Support
Enable External USB Port
NOTE: Both the option is enabled by default.
Always Allow Dell DocksThis option is enabled by default.
When set to enabled, allows connection to the Dell WD and TB family of docks (Type-C docks) independent of
USB and Thunderbolt Adapter configuration settings.
When set to disabled, the docks will be controlled via the USB and Thunderbolt Adapter configuration settings.