Sony VAIO VGC-LS30 Series User Manual page 55

To connect in STB mode (Option 2)
1 Connect one end of a TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other end
to the VHF/UHF IN port on the back panel of your set-top box (STB) (3).
2 Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT port on the set-top box (STB) (3). Connect
the other end to the VHF/UHF port (5) on the rear of your TV monitor or display.
3 Connect one end of a stereo A/V dubbing cable with triple RCA jacks (6) (not supplied), to the Composite Audio Out (L/
R) jacks (7) and the Video Out jack (8) on the back panel of your set-top box (STB) unit (3), matching the plug and jack
colors.
4 Connect the other RCA plugs of the stereo A/V dubbing cable (6) into the AUDIO INPUT (L / R) jacks (9) and the VIDEO
INPUT (VIDEO) jack (10) on the computer, matching the plug and jack colors.
5 If you prefer better video quality, connect one end of an S Video cable (11) (not supplied) to the S Video Out port (12) on
the back panel of the set-top box (STB) (3). Connect the other end to the VIDEO INPUT (S VIDEO) port (13) on the
computer.
n 55 N
Using Your VAIO Computer