Toshiba Satellite A20 Series Field Replaceable Unit Documentation page 11

FIELD REPLACEABLE UNIT DOCUMENTATION
15" DISPLAY MASK REMOVAL
Mask seals
1. Remove two mask seals at the bottom corners of the
display assembly using a pair of fine-tipped tweezers.
2. Remove two M2.5x6 black flat head screws securing
the display mask.
3. There are 23 latches securing the display mask.
Carefully insert your fingers between the mask and the
LCD panel and pry open the latches starting from the
bottom six latches, to the five latches on the right
and left sides, ending with the six top latches.
Satellite
A20 Series
Latch
Display
mask
LCD
TOSHIBA
Tough Enough for Today's World.
TM
FL INVERTER AND 15" LCD REMOVAL
LCD module
assembly
M2x5
silver
screws
LCD/FL cable M2x5 silver screw
1. Remove one M2x5 silver screw securing the
FL inverter board.
2. Carefully lift up the FL inverter board and
disconnect the LCD/FL cable from CN1 and the
FL cable from CN2.
3. Remove four M2X5 silver flat head screws
securing the LCD module assembly.
4. Carefully rotate out the top of the LCD module
enough to access the display cable
6. Peel off the tape securing the LCD/FL cable and
disconnect the cable.
7. Remove four M2x3 silver flat head screws
securing the left and right LCD brackets and
separate the brackets
M2x5
silver
screws
FL cable
FL inverter board