Important Safeguards; Precautions Before Connecting The System - Pioneer AVIC-Z920DAB Installation Manual

Navigation av system
Hide thumbs Also See for AVIC-Z920DAB:
Table of Contents

Advertisement

Connection
Precautions
Your new product and this
manual
• The navigation features of this product
(and the rear view camera option if
purchased) are intended solely to aid you
in the operation of your vehicle. It is not a
substitute for your attentiveness,
judgement and care when driving.
• Never use this product to route to
hospitals, police stations, or similar
facilities in an emergency. Please call the
appropriate emergency number.
• Do not operate this product, any
applications, or the rear view camera
option (if purchased) if doing so will
divert your attention in any way from the
safe operation of your vehicle. Always
observe safe driving rules and follow all
existing traffic regulations. If you
experience difficulty in operating this
product, pull over, park your vehicle in a
safe location and apply the handbrake
before making the necessary
adjustments.
• This manual explains how to install this
product in your vehicle. Operation of this
product is explained in the separate
manuals.
• Do not install this product where it may
(i) obstruct the driver's vision,
(ii) impair the performance of any of the
vehicle's operating systems of safety
features, including airbags, hazard lamp
buttons, or
(iii) impair the driver's ability to safely
operate the vehicle.
2
En
In some cases, it may not be possible to
install this product because of the vehicle
type or the shape of the vehicle interior.
• Model icons shown in this manual
indicate that the description is intended
for the models indicated by the icons. If
the following icon is shown, the
description is applied only to the model
shown.
e.g.)
Z000DAB

Important safeguards

WARNING
Pioneer does not recommend that you
install this product yourself. This product is
designed for professional installation only.
We recommend that only authorised
Pioneer service personnel, who have
special training and experience in mobile
electronics, set up and install this product.
NEVER SERVICE THIS PRODUCT YOURSELF.
Installing or servicing this product and its
connecting cables may expose you to the
risk of electric shock or other hazards, and
can cause damage to this product that is
not covered by warranty.
• Read this manual fully and carefully
before installing this product.
• Keep this manual handy for future
reference.
• Pay close attention to all warnings in this
manual and follow the instructions
carefully.
• This product may in certain
circumstances display inaccurate position
of your vehicle, the distance of objects
shown on the screen, and compass
directions. In addition, the system has
certain limitations, including the inability
to identify one-way streets, temporary
traffic restrictions and potentially unsafe
driving areas. Please exercise your own
judgement in the light of actual driving
conditions.
• As with any accessory in your vehicle's
interior, this product should not divert
your attention from the safe operation of
your vehicle as it may result in serious
injury or death. If you experience
difficulty in operating the system or
reading the display, please make
adjustments while safely parked.
• Please remember to wear your seat belt
at all times while operating your vehicle.
If you are in an accident, your injuries can
be considerably more severe if your seat
belt is not properly fastened.
• Certain country and government laws
may prohibit or restrict the placement
and use of this product in your vehicle.
Please comply with all applicable laws
and regulations regarding the use,
installation and operation of this product.
Precautions before
connecting the system
WARNING
Do not take any steps to tamper with or
disable the handbrake interlock system
which is in place for your protection.
Tampering with or disabling the
handbrake interlock system could result in
serious injury or death.
CAUTION
• If you decide to perform the installation
yourself, and have special training and
experience in the mobile electronics
installations, please carefully follow all of
the steps in the installation manual.
• Secure all wiring with cable clamps or
electrical tape. Do not allow any bare
wiring to remain exposed.
• Do not directly connect the yellow lead of
this product to the vehicle battery. If the
lead is directly connected to the battery,
engine vibration may eventually cause
the insulation to fail at the point where
the wire passes from the passenger
compartment into the engine
compartment. If the yellow lead's
insulation tears as a result of contact with
metal parts, short-circuiting can occur,
resulting in considerable danger.
• It is extremely dangerous to allow cables
to become wound around the steering
column or gearstick. Be sure to install this
product, its cables, and wiring away in
such so that they will not obstruct or
hinder driving.
• Make sure that the cables and wires will
not interfere with or become caught in
any of the vehicle's moving parts,
especially the steering wheel, gearstick,
handbrake, sliding seat tracks, doors, or
any of the vehicle's controls.
• Do not route wires where they will be
exposed to high temperatures. If the
insulation heats up, wires may become
damaged, resulting in a short circuit or
malfunction and permanent damage to
the product.
• Do not cut the GPS aerial cable to shorten
it or use an extension to make it longer.
Altering the aerial cable could result in a
short circuit or malfunction.
• Do not shorten any leads. If you do, the
protection circuit (fuse holder, fuse
resistor or filter, etc.) may fail to work
properly.
• Never feed power to other electronic
products by cutting the insulation of the
power supply lead of this product and
tapping into the lead. The current
capacity of the lead will be exceeded,
causing overheating.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-z720dab

Table of Contents