Sony PCV-MXS20 Online Help Center (VAIO User Guide) User Manual page 75

2 Select Fixing a Problem and then select Startup and Shut Down problems. A
list of specific problem topics appears on the right side of the dialog box.
3 Select Startup and Shutdown Troubleshooter. Follow the onscreen
instructions according to your specific situation.
How do I change the parallel port type to ECP, EPP, or bi-directional?
You can change the parallel port type using the System Setup utility (CMOS
Setup Utility). To access System Setup:
1 Click Start in the Windows taskbar, and select Turn Off Computer. Select
Restart.
2 When the Sony screen displays, press the F2 key on your keyboard.
3 Select the Advanced tab from the Setup Utility screen.
4 Select "I/O Device Configuration" and press Enter.
5 Use the arrow keys to highlight Parallel Port Mode and press Enter.
✍
You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP
options using the directional arrow keys.
6 Select the desired setting displays, and press Enter.
7 Press the F10 key to Save and Exit.
My optical drive tray does not open.
Use the Eject button
1 Make sure the computer is turned on.
2 Press the Eject button on the right of the drive.
Use the My Computer icon
1 Click Start in the Windows taskbar, then select My Computer.
2 Right-click the appropriate optical drive icon.
3 Select Eject from the shortcut menu.
✍
Avoid using adhesive labels to identify your CD media. Adhesive labels may come
off while the CD media is in use in your optical drive(s) and may cause damage to
the unit.
Troubleshooting
75