Bissell 3590 Series User Manual page 11

All floors vacuum
Hide thumbs Also See for 3590 Series:
Table of Contents

Advertisement

ug603-5202/3590/220-240v/1/03
Troubleshooting Continued
Vacuum cleaner won't pick up dirt continued.
Possible Causes
Broken or worn Drive Belt
4
Rotating Floor Brush bristles worn
5
Rotating Floor Brush jammed
6
Clog in vacuum
7
Dirt Container full
8
Dirt Container or Upper Tank not installed properly
9
Filters are dirty
10
Tools won't pick up dirt.
Possible Cause
Crack or hole in Hose
1
Clog in vacuum
2
Dirt Container full
3
Dirt Container or Upper Tank not installed properly
4
Filters are dirty
5
Vacuum cleaner is difficult to push.
Possible Causes
Incorrect Height Adjustment
1
Visible dirt escaping from cleaner.
Possible Causes
Dirt Container full
1
Filters missing or installed incorrectly
2
Dirt Container installed incorrectly
3
BISSELL Consumer Services
If your BISSELL product should require service:
In the UK call BISSELL Inc. Consumer Services at the number below and we will give you the location of a BISSELL Authorized
Service Center in your area. For all other countries contact your local in country distributor for questions, service, or repair.
If you have questions about your warranty or need replacement parts please contact the numbers below.
For UK inquiries:
Monday - Thursday 9 a.m. — 5 p.m.
BISSELL Inc. Consumer Services
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0870-225-0109
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a
warranty claim. See "About Your Warranty" on page 12 for details.
Please do not return this product to the store.
7/1/04
11:15 AM
Page 11
If suggested solutions do not correct the problem, call:
Friday 9 a.m. — 4 p.m.
Remedies
Replace Drive Belt, see pg. 9
4
Replace brush
5
Remove brush and clean debris from brush ends
6
Follow instructions on pg. 10 for clearing clogs
7
Empty Dirt Container
8
Position correctly and lock in place
9
Check and clean Upper Tank, Pre-Motor and
10
Post-Motor Filters
Remedies
Check Hose and replace if needed
1
Follow instructions on pg. 10 for clearing clogs
2
Empty Dirt Container
3
Position correctly and lock in place
4
Check and clean Upper Tank, Pre-Motor and
5
Post-Motor Filters
Remedies
Adjust Powerfoot to correct height setting
1
Remedies
Empty Dirt Container
1
Check Upper Tank, Pre-Motor and Post-Motor
2
Filters for correct installation
Pull out and re-insert Dirt Container correctly
3
For all other inquiries:
Monday - Friday
8 a.m. — 4 p.m.
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cleanview 3590 series

Table of Contents