Sony CLIE PEG-TG50 Troubleshooting Manual page 24

I cannot perform an IR HotSync
B Point the IR port of your CLIÉ handheld directly at the IR port of your
computer between 4 to 8 inches (approximately 10 to 20 centimeters)
apart. Best results of beaming distance may vary depending on
compatibility between devices.
B You cannot perform an IR HotSync
insufficient. After charging the battery of your CLIÉ handheld, try the IR
®
HotSync operation again.
B Reduce the transmission speed.
If you are using call waiting on your service line, tap Connection and IR
to a PC/handheld in the Preferences screen. Then tap Edit, Details
and specify Speed in the Details screen.
24
®
operation
®
operation if the battery remaining is